Commit f0532a23 authored by genofire's avatar genofire Committed by schneider
Browse files

ble: add card10 svc every led

parent 0d322e7c
......@@ -30,6 +30,31 @@ The current draft uses following service specification:
UUID: ``42230210-2342-2342-2342-234223422342``
write
- Background LED Bottom Left characteristic:
UUID: ``42230211-2342-2342-2342-234223422342``
write
- Background LED Bottom Right characteristic:
UUID: ``42230212-2342-2342-2342-234223422342``
write
- Background LED Top Right characteristic:
UUID: ``42230213-2342-2342-2342-234223422342``
write
- Background LED Top Left characteristic:
UUID: ``42230214-2342-2342-2342-234223422342``
write
- LEDs above characteristic:
UUID: ``42230220-2342-2342-2342-234223422342``
write
- Single rgb led characteristic:
UUID: ``422302ef-2342-2342-2342-234223422342``
......@@ -71,6 +96,27 @@ Rocket0 Rocket1 Rocket2
- Enable only Rocket0: ``0xff0000``
- Enable all rockets with 50% brightness: ``0x7f7f7f``
Background LED <Position> characteristic
---------------------------------
The Rockets characteristic makes it possible to address every three rockets.
Just write there three ``uint8`` for the rgb color.
Dataformat:
===== ======= =======
0 1 2
----- ------- -------
red green blue
===== ======= =======
- set led blue: ``0x0000ff``
- disabled: ``0x000000``
LEDs above characteristic
---------------------------------
This characteristic set every 11 leds on the top module at once.
Single rgb led characteristic
---------------------------------
......
......@@ -47,6 +47,21 @@ enum {
/*!< \brief rockets led characteristic */
CARD10_ROCKETS_CH_HDL,
CARD10_ROCKETS_VAL_HDL,
/*!< \brief led for background on bottom left characteristic */
CARD10_LED_BG_BOTTOM_LEFT_CH_HDL,
CARD10_LED_BG_BOTTOM_LEFT_VAL_HDL,
/*!< \brief led for background on bottom right characteristic */
CARD10_LED_BG_BOTTOM_RIGHT_CH_HDL,
CARD10_LED_BG_BOTTOM_RIGHT_VAL_HDL,
/*!< \brief led for background on top right characteristic */
CARD10_LED_BG_TOP_RIGHT_CH_HDL,
CARD10_LED_BG_TOP_RIGHT_VAL_HDL,
/*!< \brief led for background on top left characteristic */
CARD10_LED_BG_TOP_LEFT_CH_HDL,
CARD10_LED_BG_TOP_LEFT_VAL_HDL,
/*!< \brief leds above characteristic */
CARD10_LEDS_ABOVE_CH_HDL,
CARD10_LEDS_ABOVE_VAL_HDL,
/*!< \brief single led characteristic */
CARD10_LED_S_CH_HDL,
CARD10_LED_S_VAL_HDL,
......@@ -101,6 +116,61 @@ static const uint8_t UUID_attChar_rockets[] = {
CARD10_UUID_SUFFIX, 0x10, CARD10_UUID_PREFIX
};
/* BLE UUID for card10 led background bottom left */
static const uint8_t UUID_char_led_bg_bottom_left[] = {
ATT_PROP_WRITE_NO_RSP,
UINT16_TO_BYTES(CARD10_LED_BG_BOTTOM_LEFT_VAL_HDL),
CARD10_UUID_SUFFIX, 0x11, CARD10_UUID_PREFIX
};
static const uint8_t UUID_attChar_led_bg_bottom_left[] = {
CARD10_UUID_SUFFIX, 0x11, CARD10_UUID_PREFIX
};
/* BLE UUID for card10 led background bottom right */
static const uint8_t UUID_char_led_bg_bottom_right[] = {
ATT_PROP_WRITE_NO_RSP,
UINT16_TO_BYTES(CARD10_LED_BG_BOTTOM_RIGHT_VAL_HDL),
CARD10_UUID_SUFFIX, 0x12, CARD10_UUID_PREFIX
};
static const uint8_t UUID_attChar_led_bg_bottom_right[] = {
CARD10_UUID_SUFFIX, 0x12, CARD10_UUID_PREFIX
};
/* BLE UUID for card10 led background top right */
static const uint8_t UUID_char_led_bg_top_right[] = {
ATT_PROP_WRITE_NO_RSP,
UINT16_TO_BYTES(CARD10_LED_BG_TOP_RIGHT_VAL_HDL),
CARD10_UUID_SUFFIX, 0x13, CARD10_UUID_PREFIX
};
static const uint8_t UUID_attChar_led_bg_top_right[] = {
CARD10_UUID_SUFFIX, 0x13, CARD10_UUID_PREFIX
};
/* BLE UUID for card10 led background top left */
static const uint8_t UUID_char_led_bg_top_left[] = {
ATT_PROP_WRITE_NO_RSP,
UINT16_TO_BYTES(CARD10_LED_BG_TOP_LEFT_VAL_HDL),
CARD10_UUID_SUFFIX, 0x14, CARD10_UUID_PREFIX
};
static const uint8_t UUID_attChar_led_bg_top_left[] = {
CARD10_UUID_SUFFIX, 0x14, CARD10_UUID_PREFIX
};
/* BLE UUID for card10 above leds */
static const uint8_t UUID_char_leds_above[] = {
ATT_PROP_WRITE_NO_RSP,
UINT16_TO_BYTES(CARD10_LEDS_ABOVE_VAL_HDL),
CARD10_UUID_SUFFIX, 0x20, CARD10_UUID_PREFIX
};
static const uint8_t UUID_attChar_leds_above[] = {
CARD10_UUID_SUFFIX, 0x20, CARD10_UUID_PREFIX
};
/* BLE UUID for card10 char led single (debugging) */
static const uint8_t UUID_char_led_s[] = {
ATT_PROP_WRITE_NO_RSP,
......@@ -209,6 +279,111 @@ static void *addCard10GroupDyn(void)
ATTS_PERMIT_WRITE
);
// BG LED Bottom left
AttsDynAddAttrConst(
pSHdl,
attChUuid,
UUID_char_led_bg_bottom_left,
sizeof(UUID_char_led_bg_bottom_left),
0,
ATTS_PERMIT_READ
);
AttsDynAddAttr(
pSHdl,
UUID_attChar_led_bg_bottom_left,
NULL,
0,
3 * sizeof(uint8_t),
ATTS_SET_WRITE_CBACK,
ATTS_PERMIT_WRITE
);
// BG LED Bottom right
AttsDynAddAttrConst(
pSHdl,
attChUuid,
UUID_char_led_bg_bottom_right,
sizeof(UUID_char_led_bg_bottom_right),
0,
ATTS_PERMIT_READ
);
AttsDynAddAttr(
pSHdl,
UUID_attChar_led_bg_bottom_right,
NULL,
0,
3 * sizeof(uint8_t),
ATTS_SET_WRITE_CBACK,
ATTS_PERMIT_WRITE
);
// BG LED top right
AttsDynAddAttrConst(
pSHdl,
attChUuid,
UUID_char_led_bg_top_right,
sizeof(UUID_char_led_bg_top_right),
0,
ATTS_PERMIT_READ
);
AttsDynAddAttr(
pSHdl,
UUID_attChar_led_bg_top_right,
NULL,
0,
3 * sizeof(uint8_t),
ATTS_SET_WRITE_CBACK,
ATTS_PERMIT_WRITE
);
// BG LED top left
AttsDynAddAttrConst(
pSHdl,
attChUuid,
UUID_char_led_bg_top_left,
sizeof(UUID_char_led_bg_top_left),
0,
ATTS_PERMIT_READ
);
AttsDynAddAttr(
pSHdl,
UUID_attChar_led_bg_top_left,
NULL,
0,
3 * sizeof(uint8_t),
ATTS_SET_WRITE_CBACK,
ATTS_PERMIT_WRITE
);
// ABOVE LEDS
AttsDynAddAttrConst(
pSHdl,
attChUuid,
UUID_char_leds_above,
sizeof(UUID_char_leds_above),
0,
ATTS_PERMIT_READ
);
AttsDynAddAttr(
pSHdl,
UUID_attChar_leds_above,
NULL,
0,
11 * 3 * sizeof(uint8_t),
ATTS_SET_WRITE_CBACK,
ATTS_PERMIT_WRITE
);
// SINGLE LED
AttsDynAddAttrConst(
......@@ -315,11 +490,63 @@ static uint8_t writeCard10CB(
pValue[2]
);
return ATT_SUCCESS;
case CARD10_LED_BG_BOTTOM_LEFT_VAL_HDL:
epic_leds_set(11, pValue[0], pValue[1], pValue[2]);
APP_TRACE_INFO3(
"ble-card10: set bg bottom left: #%02x%02x%02x\n",
pValue[0],
pValue[1],
pValue[2]
);
return ATT_SUCCESS;
case CARD10_LED_BG_BOTTOM_RIGHT_VAL_HDL:
epic_leds_set(12, pValue[0], pValue[1], pValue[2]);
APP_TRACE_INFO3(
"ble-card10: set bg bottom right: #%02x%02x%02x\n",
pValue[0],
pValue[1],
pValue[2]
);
return ATT_SUCCESS;
case CARD10_LED_BG_TOP_RIGHT_VAL_HDL:
epic_leds_set(13, pValue[0], pValue[1], pValue[2]);
APP_TRACE_INFO3(
"ble-card10: set bg top right: #%02x%02x%02x\n",
pValue[0],
pValue[1],
pValue[2]
);
return ATT_SUCCESS;
case CARD10_LED_BG_TOP_LEFT_VAL_HDL:
epic_leds_set(14, pValue[0], pValue[1], pValue[2]);
APP_TRACE_INFO3(
"ble-card10: set bg top left: #%02x%02x%02x\n",
pValue[0],
pValue[1],
pValue[2]
);
return ATT_SUCCESS;
case CARD10_LEDS_ABOVE_VAL_HDL:
for( ui16 = 0; ui16 < 11; ui16++) {
epic_leds_set(
ui16,
pValue[ui16 * 3],
pValue[ui16 * 3 + 1],
pValue[ui16 * 3 + 2]
);
APP_TRACE_INFO4(
"ble-card10: set led %ld above to #%02x%02x%02x\n",
ui16,
pValue[ui16 * 3],
pValue[ui16 * 3 + 1],
pValue[ui16 * 3 + 2]
);
}
case CARD10_LED_S_VAL_HDL:
BYTES_TO_UINT16(ui16, pValue);
epic_leds_set(ui16, pValue[2], pValue[3], pValue[4]);
APP_TRACE_INFO4(
"ble-card10: set single led %ld to #%x%x%x\n",
"ble-card10: set single led %ld to #%02x%02x%02x\n",
ui16,
pValue[2],
pValue[3],
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment