Commit 6aef573a authored by schneider's avatar schneider
Browse files

Revert "fix(openocd): config file support for second flash bank"

This reverts commit 719ff6ea.
parent 719ff6ea
#!/bin/sh
set -e
echo "build image" $1 $2 $3
PYTHON="$1"
ELF="$2"
BIN="$3"
......
......@@ -6,12 +6,12 @@ crc = 0
data = open(sys.argv[1], 'rb').read()
crc = crc16.crc16xmodem(data)
#print(crc)
print(crc)
padded = data + bytes([crc >> 8, crc & 0xFF])
crc = 0
crc = crc16.crc16xmodem(padded)
#print(crc)
print(crc)
open(sys.argv[1], 'wb').write(padded)
......@@ -20,11 +20,8 @@
#define PARTITION_START (0x10000000 + 64 * 1024)
//#define PARTITION_END (0x10000000 + 512 * 1024 - 1) /* TODO: check if 1 MB also works. Might have to enable the second bank */
#define PARTITION_END (0x10000000 + 1024 * 1024 - 1)
//#define PARTITION_START (0x10080000)
//#define PARTITION_END (0x10000000 + 1024 * 1024 - 1) /* TODO: check if 1 MB also works. Might have to enable the second bank */
#define PARTITION_END (0x10000000 + 512 * 1024 - 1) /* TODO: check if 1 MB also works. Might have to enable the second bank */
//#define PARTITION_END (0x10000000 + 1024 * 1024 - 1)
extern void run_usbmsc(void);
......@@ -191,14 +188,13 @@ int main(void)
while(1);
}
//MXC_FLC0->clkdiv = 96;
//MXC_FLC0->clkdiv = 96;
if(mount()) {
if(check_integrity()) {
printf("Found valid application image\n");
if(is_update_needed()) {
printf("Trying to update application from external flash\n");
MXC_FLC0->clkdiv = 54;
erase_partition();
flash_partition();
} else {
......
......@@ -60,7 +60,6 @@ custom_target(
name + '.bin',
build_by_default: true,
output: name + '.bin',
#output: 'card10.bin',
input: elf,
command: [build_image, '@INPUT@', '@OUTPUT0@'],
)
......@@ -174,7 +174,7 @@ void card10_diag(void)
void core1_start(void) {
//MXC_GCR->gp0 = (uint32_t)(&__isr_vector_core1);
MXC_GCR->gp0 = 0x10080000;
MXC_GCR->gp0 = 0x10040000;
MXC_GCR->perckcn1 &= ~MXC_F_GCR_PERCKCN1_CPU1;
}
......
......@@ -38,7 +38,7 @@
/* If used, they should be adjusted for the external Flash/RAM size */
MEMORY {
SPIX (rx) : ORIGIN = 0x08000000, LENGTH = 128M
FLASH (rx) : ORIGIN = 0x10080000, LENGTH = 512k
FLASH (rx) : ORIGIN = 0x10040000, LENGTH = 256k
SRAM (rwx) : ORIGIN = 0x20040000, LENGTH = 256k
SPID (r) : ORIGIN = 0x80000000, LENGTH = 512M
}
......
......@@ -199,18 +199,14 @@ int FLC_PageErase(uint32_t address)
uint32_t addr;
mxc_flc_regs_t *flc = NULL;
printf("%p\n", address);
// Get FLC Instance
if ((err = SYS_FLC_GetByAddress(&flc, address)) != E_NO_ERROR) {
printf("A\n");
return err;
}
if ((err = SYS_FLC_GetPhysicalAddress(address, &addr)) < E_NO_ERROR) {
printf("B\n");
return err;
}
if ((err = prepare_flc(flc)) != E_NO_ERROR) {
printf("C\n");
return err;
}
......@@ -231,7 +227,6 @@ int FLC_PageErase(uint32_t address)
/* Check access violations */
if (flc->intr & MXC_F_FLC_INTR_AF) {
flc->intr &= ~MXC_F_FLC_INTR_AF;
printf("D\n");
return E_BAD_STATE;
}
......
......@@ -9,10 +9,8 @@ reset_config none
# Set flash parameters
set FLASH_BASE 0x10000000
set FLASH_BASE1 0x10080000
set FLASH_SIZE 0x80000
set FLASH_SIZE 0x300000
set FLC_BASE 0x40029000
set FLC_BASE1 0x40029400
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_OPTIONS 0x01
......
......@@ -93,8 +93,3 @@ if { [info exists FLASH_OPTIONS] } {
flash bank $_CHIPNAME.flash max32xxx $_FLASH_BASE $_FLASH_SIZE 0 0 $_CHIPNAME.cpu \
$_FLC_BASE $_FLASH_SECTOR $_FLASH_CLK $_FLASH_OPTIONS
if { [info exists FLASH_BASE1] } {
flash bank $_CHIPNAME.flash1 max32xxx $FLASH_BASE1 $_FLASH_SIZE 0 0 $_CHIPNAME.cpu \
$FLC_BASE1 $_FLASH_SECTOR $_FLASH_CLK $_FLASH_OPTIONS
}
......@@ -67,15 +67,6 @@ custom_target(
name + '.bin',
build_by_default: true,
output: name + '.bin',
#input: [elf, 'epicardium/epicardium.bin'],
input: [elf],
input: elf,
command: [build_image, '@INPUT@', '@OUTPUT0@'],
)
#custom_target(
# name + '.b1n',
# build_by_default: true,
# output: name + '.b1n',
# input: bin,
# command: [build_image, '@INPUT@', '@OUTPUT0@'],
#)
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment