Commit 3f4677f8 authored by Techy's avatar Techy Committed by Rahix
Browse files

fix(openocd-scripts): Always use SWD

OpenOCD tried

    Info : auto-selecting first available session transport "jtag".
           To override use 'transport select <transport>'.

using a JLink debugger.  Overriding it with SWD is what I did. With the
CMSIS debugger OpenOCD you get lucky:

    Info : auto-selecting first available session transport "swd".

Hope forcing it always to SWD will make it easier for others using
different debuggers.
parent d2f0f229
......@@ -115,6 +115,12 @@ command to soft-reset card10.
.. note::
You will also find the following self-describing gdb files in the firmware
root directory, which do not require additional arguments:
``flash-all.gdb, flash-bootloader.gdb,
flash-both.gdb, flash-epicardium.gdb, flash-pycardium.gdb``
.. warning::
If you are used to use ``mon reset halt``, be aware that the card10 prototypes
do not connect the reset line to the debugger. OpenOCD is configured to only do
# Maxim Integrated MAX32665 OpenOCD target configuration file
# selecting transport method, to prevenet auto-selecting something else
transport select swd
# Set the reset pin configuration
reset_config none
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment