1. 01 Sep, 2008 1 commit
  2. 25 Aug, 2008 1 commit
  3. 24 Aug, 2008 1 commit
  4. 22 Aug, 2008 1 commit
  5. 20 Aug, 2008 1 commit
  6. 19 Aug, 2008 2 commits
  7. 11 Aug, 2008 1 commit
  8. 08 Aug, 2008 1 commit
  9. 06 Aug, 2008 1 commit
  10. 05 Aug, 2008 3 commits
  11. 31 Jul, 2008 1 commit
  12. 28 Jul, 2008 2 commits
  13. 26 Jul, 2008 2 commits
  14. 25 Jul, 2008 2 commits
  15. 24 Jul, 2008 1 commit
  16. 23 Jul, 2008 1 commit
  17. 21 Jul, 2008 1 commit
    • oharboe's avatar
      · dfbb9f3e
      oharboe authored
      - jtag_khz/speed are now single parameter only. These are used
      from pre/post_reset event scripts. Adding the second parameter was
      a mistake seen in retrospect. this gives precise control in post_reset
      for *when* the post reset speed is set. The pre_reset event was
      added *after* the second parameter to jtag_khz/speed
      - the target implementations no longer gets involved in the reset mode
      scheme. Either they reset a target into a halted mode or not.
      target_process_reset()
      detects if the reset halt failed or not.
      - tcl target event names are now target_N_name.  Mainly internal
      at this early stage, but best to get the naming right now.
      - added hardcoded reset modes from gdb_server.c. I don't know precisely what
      these defaults should be or if it should be made configurable. Perhaps some
      hardcoded defaults will do for now and it can be made configurable later.
      - bugfix in cortex_m3.c for reset_run_and_xxx?
      - issue syntax error upon obsolete argument in target command instead of
      printing message that will surely drown in the log
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      dfbb9f3e
  18. 20 Jul, 2008 1 commit
  19. 18 Jul, 2008 5 commits
  20. 17 Jul, 2008 1 commit
  21. 16 Jul, 2008 1 commit
  22. 09 Jul, 2008 2 commits
  23. 08 Jul, 2008 3 commits
  24. 07 Jul, 2008 1 commit
  25. 06 Jul, 2008 2 commits
    • ntfreak's avatar
      - fixed build issues with win32 · 655e4f88
      ntfreak authored
      - fixed build warnings for last commit
      - set svn props for last commit
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      655e4f88
    • oharboe's avatar
      src/helper/configuration.h · dc796a20
      oharboe authored
      	- Log output handlers now get a "const char *line"
      	- Added "const" to parameter.
      
      src/helper/command.c
      src/helper/command.h
      	- New function:  'command_output_text()'
      	- Log output handlers now get a "const char *line"
       
      src/helper/options.c
      	- Log output handlers now get a "const char *line"
      
      src/server/telnet_server.c
      	- DO not transmit NULL bytes via TELNET.
      	- Log output handlers now get a "const char *line"
      	
      src/server/gdb_server.c
      	- Log output handlers now get a "const char *line"
      	
      	*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent 
      	previously to the mailing list for TCL users try
      
      src/target/target.c
      	*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent 
      	previously to the mailing list for TCL users try
      	
      src/target/target.h
      	*** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent 
      	previously to the mailing list for TCL users try
      
      src/openocd.c
          - **MAJOR** Work: New TCL/Jim function: mem2array
      	- **MAJOR** Work: Redirect Tcl/Jim stdio output to remote users.
      	- Previously: TCL output did not go to GDB.
      	- Previously: TCL output did not go to TELNET
      	- Previously: TCL output only goes to control console.
      	- This fixes that problem.
      	+ Created callbacks:
      		+openocd_jim_fwrite()	
      		+openocd_jim_fread()
      		+openocd_jim_vfprintf()
      		+openocd_jim_fflush()
      		+openocd_jim_fgets()
      
      src/Makefile.am
      	- New TCL files.
      	- Future note: This should be more automated.  As the list of
      	  'tcl' files grows maintaning this list will suck.
      
      src/Jim.c
      	- ** THIS INCLUDES A PREVIOUS PATCH I SENT EARLIER **
      	- that impliments many [format] specifies JIM did not support.
      	- Jim_FormatString() - **MAJOR** work.
      	- Previously only supported "%s" "%d" and "%c"
      	- And what support existed had bugs.
      	- NEW: *MANY* formating parameters are now supported.
      	- TODO: The "precision" specifier is not supported.
      
      	** NEW ** This patch.
      	
      	- Jim_StringToWide() test if no conversion occured.
      	- Jim_StringToIndex() test if no conversion occured.
      	- Jim_StringToDouble() test if no conversion occured.
      
      	** NEW ** This Patch. Major Work.
      	- Previously output from JIM did not get sent to GDB
      	- Ditto: Output to Telnet session.
      	- Above items are now fixed - By introducing callbacks
      	  new function pointers in the "interp" structure.
      
      	- Helpers that call the callbacks.
      	
      	- New function: Jim_fprintf()
      	- New function: Jim_vfprintf()
      	- New function: Jim_fwrite()
      	- New function: Jim_fread()
      	- New function: Jim_fflush()
      	- New function: Jim_fgets()
      
      	By default: the output is to STDIO as previous.
      	The "openocd.c" - redirects the output as needed.
      	
      	- Jim_Panic() - Send panic to both STDERR and the interps
      	specified STDERR output as a 2nd choice.
      
      	- Now JIM's "stdin/stdout/stderr" paramters are "void *"
      	and are no longer "FILE *".
      
      src/Jim.h
      	- **MAJOR**
      	-  New JIM STDIO callbacks in the "interp" structure.
      	-  change: "stdin/stdout/stderr" are now "void *" cookies.
      	-  New JIM stdio helper functions.
      
      
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      dc796a20
  26. 02 Jul, 2008 1 commit