GitLab

Fixed bug: if virtual address for working memory was not specified
and MMU was enabled, then address 0 would be used.

Require working address to be specified for both MMU enabled
and disabled case.

For some completely inexplicable reason this fixes the regression
in svn 2646 for flash write in arm926ejs target. The logs showed
that MMU was disabled in the case below:

https://lists.berlios.de/pipermail/openocd-development/2009-November/011882.html

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

When dumping over 100 registers (as on most ARM9 + ETM cores),
aid readability by splitting them into logical groups.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Added target_read/write_phys_memory() fn's. mdX/mwX commands updated to support phys flag to specify bypassing of MMU.

Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>

Observed:

  openocd: core.c:318: jtag_checks: Assertion `jtag_trst == 0' failed.

The issue was that nothing disabled background polling during calls
from the TCL shell to "jtag_reset 1 1".  Fix by moving the existing
poll-disable mechanism to the JTAG layer where it belongs, and then
augmenting it to always pay attention to TRST and SRST.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

files; omitted src/httpd


git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 - Shrink messaging during resets, primarily by getting rid of
   "nothing happened" noise that hides *useful* information.

 - Improve: the "no IDCODE" message by identifying which tap only
   supports BYPASS; and the TAP event strings.

Related minor code updates:

 - Remove two needless tests when examining the chain:  we know
   we have a TAP, and that all TAPs have names.

 - Clean up two loops, turning "while"s into "for"s which better
   show what's actually being done.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2736 b42882b7-edfa-0310-969c-e2dbd0fdcd60

and Tcl/external):

 - Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with
   ICEpick ... first C code flags TAPs that got disabled, then call
   any Tcl code that might want to re-enable them.

 - Always call the C/internal handlers when JTAG operations can be
   issued; previously that wasn't done when TRST was used. 

Plus some small cleanups (whitespace, strings, better messaging
during debug and on some errors) to reset-related code.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2730 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2693 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2692 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2690 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Alexei Babich <a.babich@rez.ru> fix problems with unecessary tailend byte accesses. Use 16 bit access on tailend of a memory read if possible.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2684 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2650 b42882b7-edfa-0310-969c-e2dbd0fdcd60

reset operations.  Maybe they can't; or it's a "not yet" thing.

Note that the assert/deassert operations can't yet trigger for
OMAP3 because resets currently include JTAG reset in all cases,
resetting the ICEpick and thus disabling the TAP for Cortex-A8.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2620 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2615 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 - spell "address" right
 - list bp/wp params as optional

And make those source lines wrap at sane margins.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2596 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Simplify dumping of register lists by only printing cached values
if they are marked as valid.  Most of the time, they are invalid;
so printing *any* value is just misleading.

Note that for ARM7 and ARM9 most EmbeddedICE registers (except for
debug status) could be cached most of the time; and their register
cache isn't maintained properly (many accesses seem to bypass that
cache code).

git-svn-id: svn://svn.berlios.de/openocd/trunk@2594 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2549 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2478 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2411 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2409 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\s*$' with ''.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2379 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2378 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '[ \t]*[)]' with ')'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2377 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '([ \t]*' with '('.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2376 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\([<>]\)(' with ') \1 ('.
- Replace ')\([<>]\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\([<>]\)(' with '\1 \2 ('.
- Replace '\(\w\)\([<>]\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2375 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\([|]\)(' with ') \1 ('.
- Replace ')\([|]\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\([|]\)(' with '\1 \2 ('.
- Replace '\(\w\)\([|]\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2374 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(+\)(' with ') \1 ('.
- Replace ')\(+\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(+\)(' with '\1 \2 ('.
- Replace '\(\w\)\(+\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2373 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(=\)(' with '\1 \2 ('.
- Replace '\(\w\)\(=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2372 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(==\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(>>\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(>>\)(' with '\1 \2 ('.
- Replace '\(\w\)\(>>\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2369 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(>=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(>=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2367 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(&&\)(' with ') \1 ('.
- Replace '\(\w\)\(&&\)(' with '\1 \2 ('.
- Replace '\(\w\)\(&&\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2366 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\(\w\)\([+]=\)(' with '\1 \2 ('.
- Replace '\(\w\)\([+]=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2364 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(!=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(!=\)(' with '\1 \2 ('.
- Replace '\(\w\)\(!=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2363 b42882b7-edfa-0310-969c-e2dbd0fdcd60