1. 06 Jun, 2008 1 commit
  2. 27 May, 2008 1 commit
  3. 21 May, 2008 1 commit
  4. 20 May, 2008 1 commit
  5. 19 May, 2008 1 commit
  6. 07 May, 2008 1 commit
  7. 25 Apr, 2008 1 commit
  8. 23 Apr, 2008 1 commit
  9. 16 Apr, 2008 1 commit
  10. 15 Apr, 2008 1 commit
  11. 13 Apr, 2008 1 commit
  12. 11 Apr, 2008 1 commit
  13. 09 Apr, 2008 1 commit
  14. 07 Apr, 2008 1 commit
    • oharboe's avatar
      · 2b7504c2
      oharboe authored
      - only if "reset halt" or "reset init" are issued will the reset vector be set up
      - If communication fails during assert between assert/deassert and during
      assert, warnings are printed. The warning suggests using srst_only if the
      clock locks up as that would allow the reset vector to be set up before
      asserting reset.
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@544 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      2b7504c2
  15. 04 Apr, 2008 1 commit
  16. 03 Apr, 2008 1 commit
    • oharboe's avatar
      · d3f0549f
      oharboe authored
      - Work on fixing erase check. Many implementations are plain broken.
      Wrote a default flash erase check fn which uses CFI's target algorithm
      w/fallback to memory reads. 
      - "flash info" no longer prints erase status as it is stale. 
      - "flash erase_check" now prints erase status. erase check can take a 
      *long* time. Work in progress
      - arm7/9 with seperate srst & trst now supports reset init/halt
      after a power outage. arm7/9 no longer makes any assumptions
      about state of target when reset is asserted.
      - fixes for srst & trst capable arm7/9 with reset init/halt
      - prepare_reset_halt retired. This code needs to be inside
      assert_reset anyway
      - haven't been able to get stm32 write algorithm to work. Fallback
      flash write does work. Haven't found a version of openocd trunk
      where this works.
      - added target_free_all_working_areas_restore() which can
      let be of restoring backups. This is needed when asserting
      reset as the target must be assumed to be an unknown state.
      Added some comments to working areas API
      - str9 reset script fixes
      - some guidelines
      - fixed dangling callbacks upon reset timeout 
      
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      d3f0549f
  17. 31 Mar, 2008 1 commit
  18. 26 Mar, 2008 1 commit
  19. 25 Mar, 2008 1 commit
  20. 22 Mar, 2008 1 commit
  21. 13 Mar, 2008 1 commit
  22. 07 Mar, 2008 1 commit
    • oharboe's avatar
      · c78b4fe4
      oharboe authored
      - Improves error handling upon GDB connect
      - switch to synchronous halt during connect. This fixes the bug
        where poll() was not invoked between halt() and servicing the
        'g' register packet
      - halt() no longer returns error code when target is already halted, just
        logs a warning. Only the halt() implementation can say anything
        meaningful about why a halt() failed, so error messages are pushed
        up to halt()
      - fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest
        of the implementations are still busted.
      - by using USER() instead of command_print() the log gets the 
        source + line #. Nice.
      - no longer invoke exit() if soft_reset_halt fails. A reset can often 
        fix the problem.
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      c78b4fe4
  23. 06 Mar, 2008 1 commit
  24. 05 Mar, 2008 1 commit
  25. 01 Mar, 2008 2 commits
  26. 29 Feb, 2008 1 commit
  27. 26 Feb, 2008 1 commit
  28. 25 Feb, 2008 1 commit
  29. 24 Feb, 2008 1 commit
    • oharboe's avatar
      - fixed target->type->poll() return value · 1aa85468
      oharboe authored
      - added arch_state to show status of currently selected target
      - simplified target->type->arch_state() api.
      - clean up telnet output a bit
      - fixed GDB output for arch_state
      - removed a couple of unecessary exit()'s
      - cleaned up error propagation a bit in a few places
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      1aa85468
  30. 22 Feb, 2008 1 commit
  31. 19 Feb, 2008 1 commit
    • ntfreak's avatar
      - Fixed bug in pathmove for XScale · 5c0e8efa
      ntfreak authored
      - added virtual address to working_area.
      - Improved error messages in a number of places
      - Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed
      - Added help for some config commands
      - Added verification of sw breakpoints with ERROR() message
      - Removed a couple of exit()'s and replaced with error message
      - cosmetic fix to armv4_5.c, easier to read
      - added polymorphic(with default) virt2phys and mmu enable query function to target.h
      - added virt2phys command that uses target->type->virt2phys() fn
      Thanks to Øyvind Harboe
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@310 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      5c0e8efa
  32. 06 Feb, 2008 1 commit
  33. 17 Jan, 2008 1 commit
  34. 07 Jan, 2008 1 commit
  35. 04 Dec, 2007 1 commit
  36. 22 Oct, 2007 1 commit
  37. 10 Aug, 2007 1 commit
    • drath's avatar
      - renamed M5960 USB JTAG to "flyswatter" · 20e4e77c
      drath authored
      - make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
      - various whitespace fixes
      - removed various warnings
      - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
      - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
      - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
      - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
      semihosting, all ARM7/9 only for now)
      - added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
      - added support for receiving data via ARM7/9 DCC
      - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
      write_image' (write image files (bin, hex, elf, s19) to a target).
      - added support for AMD/ST/SST 29F400B non-cfi flashes
      
      
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      20e4e77c
  38. 21 Jun, 2007 1 commit
  39. 29 May, 2007 1 commit
    • drath's avatar
      - split fileio handling into fileio part and image handling · 237e8948
      drath authored
      - reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
      - added XScale debug handler binary to repository
      - added Thumb disassembling (thanks to Vincent Palatin for this patch)
      - added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
      This checkin is experimental, not suitable for general use
      
      
      git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
      237e8948