Commit f8701ea7 authored by oharboe's avatar oharboe
Browse files

Tim Hudson contributed at91sam9260 target config files + some interface definitions.

git-svn-id: svn://svn.berlios.de/openocd/trunk@609 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent 70bef9e2
......@@ -29,5 +29,6 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
target/epc9301.cfg target/ipx42x.cfg target/lpc2129.cfg target/netx500.cfg \
target/omap5912.cfg target/pxa270.cfg target/str750.cfg target/str9comstick.cfg \
target/str730.cfg target/stm32stick.cfg event/str912_reset.script event/str710_program.script \
target/lm3s811.cfg interface/luminary.cfg interface/luminary-lm3s811.cfg interface/stm32-stick.cfg
target/lm3s811.cfg interface/luminary.cfg interface/luminary-lm3s811.cfg interface/stm32-stick.cfg \
interface/calao-usb-a9260-c01.cfg interface/calao-usb-a9260-c02.cfg \
interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg
#
# Calao Systems USB-A9260-C01
#
# http://www.calao-systems.com/
#
interface ft2232
ft2232_layout jtagkey
ft2232_device_desc "USB-A9260"
ft2232_vid_pid 0x0403 0x6010
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg
#
# Calao Systems USB-A9260-C02
#
# http://www.calao-systems.com/
#
interface ft2232
ft2232_layout jtagkey
ft2232_device_desc "USB-A9260 A"
ft2232_vid_pid 0x0403 0x6001
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg
#
# Calao Systems USB-A9260 common -C01 -C02 setup
#
# http://www.calao-systems.com/
#
# See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg
#
# note: you must have an openocd version where jtag_speed sets two values
# trunk ver 606 contains the fix for this particular issue which can
# be seen if jtag_speed does not set two separate values
#
jtag_speed 1200 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
######################################
# Target: Atmel AT91SAM9260
######################################
reset_config trst_and_srst
#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
jtag_device 4 0x1 0xf 0xe
jtag_nsrst_delay 200
jtag_ntrst_delay 200
######################
# Target configuration
######################
#target <type> <endianess> <reset mode> <JTAG pos> <variant>
target arm926ejs little reset_run 0 arm926ejs
run_and_halt_time 0 30
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment