Skip to content
GitLab
Commit d2e9877b authored by Kevin Gillespie's avatar Kevin Gillespie Committed by Kevin
Browse files

Removing flash burst bits and adding options. 

Change-Id: I2533490869643d283b54437e958dc663df05132e
parent 33d8d55f
Show whitespace changes
Inline Side-by-side
src/flash/nor/max32xxx.c
View file @ d2e9877b
......@@ -87,9 +87,6 @@
#define ARM_PID_DEFAULT_CM4 0x0000B4C4
#define MAX326XX_ID 0x0000004D
#define WRITE32BIT 0
#define WRITE128BIT 1
#define OPTIONS_128 0x01 /* Perform 128 bit flash writes */
#define OPTIONS_ENC 0x02 /* Encrypt the flash contents */
#define OPTIONS_AUTH 0x04 /* Authenticate the flash contents */
......@@ -98,7 +95,6 @@
#define OPTIONS_RELATIVE_XOR 0x20 /* Only XOR the offset of the address when encrypting */
#define OPTIONS_KEYSIZE 0x40 /* Use a 256 bit KEY */
static int max32xxx_mass_erase(struct flash_bank *bank);
struct max32xxx_flash_bank {
......@@ -109,11 +105,9 @@ struct max32xxx_flash_bank {
unsigned int sector_size;
unsigned int clkdiv_value;
unsigned int int_state;
unsigned int burst_size_bits;
unsigned int enc_options;
unsigned int options;
};
/* see contib/loaders/flash/max32xxx/max32xxx.s for src */
static const uint8_t write_code[] = {
0x9b, 0x46, 0x51, 0xf8, 0x84, 0x3c, 0xa1, 0xf5, 0x82, 0x77, 0x02, 0x93, 0x13, 0xf0, 0x02, 0x03, 0x05, 0x93, 0x1e, 0xd0,
0x4f, 0xf0, 0x80, 0x43, 0x9c, 0x68, 0x64, 0x03, 0x5e, 0xbf, 0x9c, 0x68, 0x44, 0xf4, 0x80, 0x24, 0x9c, 0x60, 0x5c, 0x6a,
......@@ -162,15 +156,12 @@ static const uint8_t write_code[] = {
0xff, 0x09, 0x3d, 0xe7, 0x4f, 0xf0, 0xff, 0x09, 0x60, 0xe7, 0x4f, 0xf0, 0xff, 0x09, 0x83, 0xe7, 0x5d, 0x44, 0x9f, 0xe7,
};
/* Config Command: flash bank name driver base size chip_width bus_width target [driver_option]
flash bank max32xxx <base> <size> 0 0 <target> <FLC base> <sector size> <clkdiv> [burst_bits]
*/
FLASH_BANK_COMMAND_HANDLER(max32xxx_flash_bank_command)
{
struct max32xxx_flash_bank *info;
if ((CMD_ARGC < 10) || (CMD_ARGC > 11)) {
LOG_ERROR("incorrect flash bank max32xxx configuration: <base> <size> 0 0 <target> <FLC base> <sector size> <clkdiv> <burst_bits> [enc_options]");
if ((CMD_ARGC < 10) || (CMD_ARGC > 10)) {
LOG_ERROR("incorrect flash bank max32xxx configuration: <base> <size> 0 0 <target> <FLC base> <sector size> <clkdiv> <options>");
return ERROR_FLASH_BANK_INVALID;
}
......@@ -179,22 +170,7 @@ FLASH_BANK_COMMAND_HANDLER(max32xxx_flash_bank_command)
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[6], info->flc_base);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[7], info->sector_size);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[8], info->clkdiv_value);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[9], info->burst_size_bits);
if ((info->burst_size_bits != 128) && (info->burst_size_bits != 32)) {
LOG_ERROR("Invalid burst size %d, must be 32 or 128", info->burst_size_bits);
return ERROR_FLASH_BANK_INVALID;
}
if(CMD_ARGC == 11) {
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[10], info->enc_options);
} else {
if(info->burst_size_bits == 128) {
info->enc_options = OPTIONS_128;
} else {
info->enc_options = 0x0;
}
}
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[9], info->options);
info->int_state = 0;
bank->driver_priv = info;
......@@ -514,7 +490,7 @@ static int max32xxx_write_block(struct flash_bank *bank, const uint8_t *buffer,
/* mem_params for options */
init_mem_param(&mem_param[0], source->address + (source->size - 4 - 128), 4, PARAM_OUT);
buf_set_u32(mem_param[0].value, 0, 32, info->enc_options);
buf_set_u32(mem_param[0].value, 0, 32, info->options);
/* leave room for stack, 32-bit options and encryption buffer */
retval = target_run_flash_async_algorithm(target, buffer, wcount*4, 1, 1, mem_param,
......@@ -556,7 +532,7 @@ static int max32xxx_write(struct flash_bank *bank, const uint8_t *buffer,
if (info->probed == 0)
return ERROR_FLASH_BANK_NOT_PROBED;
if (info->burst_size_bits == 32) {
if ((info->options & OPTIONS_128) == 0) {
if (offset & 0x3) {
LOG_ERROR("offset size must be 32-bit aligned");
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
......@@ -600,7 +576,7 @@ static int max32xxx_write(struct flash_bank *bank, const uint8_t *buffer,
}
}
if ((info->burst_size_bits == 32) && (remaining >= 4)) {
if (((info->options & OPTIONS_128) == 0) && (remaining >= 4)) {
/* write in 32-bit units*/
target_read_u32(target, info->flc_base + FLC_CN, &flash_cn);
flash_cn |= FLC_CN_32BIT;
......@@ -629,7 +605,7 @@ static int max32xxx_write(struct flash_bank *bank, const uint8_t *buffer,
}
}
if ((info->burst_size_bits == 128) && (remaining >= 16)) {
if ((info->options & OPTIONS_128) && (remaining >= 16)) {
/* write in 128-bit units */
target_read_u32(target, info->flc_base + FLC_CN, &flash_cn);
flash_cn &= ~(FLC_CN_32BIT);
......@@ -662,7 +638,7 @@ static int max32xxx_write(struct flash_bank *bank, const uint8_t *buffer,
}
}
if ((info->burst_size_bits == 32) && remaining > 0) {
if (((info->options & OPTIONS_128) == 0) && remaining > 0) {
/* write remaining bytes in a 32-bit unit */
target_read_u32(target, info->flc_base + FLC_CN, &flash_cn);
flash_cn |= FLC_CN_32BIT;
......@@ -695,7 +671,7 @@ static int max32xxx_write(struct flash_bank *bank, const uint8_t *buffer,
}
}
if ((info->burst_size_bits == 128) && remaining > 0) {
if ((info->options & OPTIONS_128) && remaining > 0) {
/* write remaining bytes in a 128-bit unit */
if (target_read_u32(target, info->flc_base + FLC_CN, &flash_cn) != ERROR_OK) {
max32xxx_flash_op_post(bank);
......
tcl/target/max32520.cfg 0 → 100644
View file @ d2e9877b
# Maxim Integrated MAX32665 OpenOCD target configuration file
# www.maximintegrated.com
# Set the reset pin configuration
reset_config srst_only
adapter_nsrst_delay 200
# Set flash parameters
set FLASH_BASE 0x10000000
set FLASH_SIZE 0x200000
set FLC_BASE 0x40029000
set FLASH_SECTOR 0x2000
# Currently set for Emulator
set FLASH_CLK 40
set FLASH_OPTIONS 0x63
source [find target/max32xxx.cfg]
tcl/target/max32620.cfg
View file @ d2e9877b
......@@ -11,7 +11,7 @@ set FLASH_SIZE 0x200000
set FLC_BASE 0x40002000
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_BITS 32
set FLASH_OPTIONS 0x00
# Setup the reserved TAP
set RSV_TAP 1
......
tcl/target/max32625.cfg
View file @ d2e9877b
......@@ -11,7 +11,7 @@ set FLASH_SIZE 0x80000
set FLC_BASE 0x40002000
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_BITS 32
set FLASH_OPTIONS 0x00
# Setup the reserved TAP
set RSV_TAP 1
......
tcl/target/max3263x.cfg
View file @ d2e9877b
......@@ -10,7 +10,7 @@ set FLASH_SIZE 0x200000
set FLC_BASE 0x40002000
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_BITS 32
set FLASH_OPTIONS 0x00
# Setup the reserved TAP
set RSV_TAP 1
......
tcl/target/max32650.cfg
View file @ d2e9877b
......@@ -11,7 +11,6 @@ set FLASH_SIZE 0x300000
set FLC_BASE 0x40029000
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_BITS 32
# set FLASH_BITS 128
set FLASH_OPTIONS 0x00
source [find target/max32xxx.cfg]
tcl/target/max32660.cfg
View file @ d2e9877b
......@@ -11,7 +11,6 @@ set FLASH_SIZE 0x40000
set FLC_BASE 0x40029000
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_BITS 32
# set FLASH_BITS 128
set FLASH_OPTIONS 0x00
source [find target/max32xxx.cfg]
tcl/target/max32665.cfg
View file @ d2e9877b
......@@ -11,6 +11,6 @@ set FLASH_SIZE 0x300000
set FLC_BASE 0x40029000
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_BITS 128
set FLASH_OPTIONS 0x01
source [find target/max32xxx.cfg]
tcl/target/max32xxx.cfg
View file @ d2e9877b
......@@ -77,21 +77,19 @@ if { [info exists FLASH_CLK] } {
set _FLASH_CLK 96
}
if { [info exists FLASH_BITS] } {
set _FLASH_BITS $FLASH_BITS
# OPTIONS_128 0x01 /* Perform 128 bit flash writes */
# OPTIONS_ENC 0x02 /* Encrypt the flash contents */
# OPTIONS_AUTH 0x04 /* Authenticate the flash contents */
# OPTIONS_COUNT 0x08 /* Add counter values to authentication */
# OPTIONS_INTER 0x10 /* Interleave the authentication and count values*/
# OPTIONS_RELATIVE_XOR 0x20 /* Only XOR the offset of the address when encrypting */
# OPTIONS_KEYSIZE 0x40 /* Use a 256 bit KEY */
if { [info exists FLASH_OPTIONS] } {
set _FLASH_OPTIONS $FLASH_OPTIONS
} else {
set _FLASH_BITS 32
}
if { [info exists ENC_OPTIONS] } {
set _ENC_OPTIONS $ENC_OPTIONS
} else {
if { $FLASH_BITS == 128 } {
set _ENC_OPTIONS 1
} else {
set _ENC_OPTIONS 0
}
set _FLASH_OPTIONS 0
}
flash bank $_CHIPNAME.flash max32xxx $_FLASH_BASE $_FLASH_SIZE 0 0 $_CHIPNAME.cpu \
$_FLC_BASE $_FLASH_SECTOR $_FLASH_CLK $_FLASH_BITS $_ENC_OPTIONS
$_FLC_BASE $_FLASH_SECTOR $_FLASH_CLK $_FLASH_OPTIONS
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment