Commit b61e4548 authored by Antonio Borneo's avatar Antonio Borneo Committed by Tomas Vanek
Browse files

Set empty usage field for commands that do not need parameters



The missing field causes runtime debug message
	BUG: command '%s' does not have the '.usage' field filled out

While there, fix some minor typo in the help messages:
	s/deasert/deassert/
	s/Deasert/Deassert/

Change-Id: If3dd18265cda103ca0d05609f67f4ca58e7cbb27
Signed-off-by: default avatarAntonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5024


Tested-by: jenkins
Reviewed-by: default avatarTomas Vanek <vanekt@fbl.cz>
parent b6ea9224
......@@ -1327,6 +1327,7 @@ static const struct command_registration mflash_exec_command_handlers[] = {
.handler = mg_probe_cmd,
.mode = COMMAND_EXEC,
.help = "Detect bank configuration information",
.usage = "",
},
{
.name = "write",
......
......@@ -411,6 +411,7 @@ static const struct command_registration nand_exec_command_handlers[] = {
.handler = handle_nand_list_command,
.mode = COMMAND_EXEC,
.help = "list configured NAND flash devices",
.usage = "",
},
{
.name = "info",
......
......@@ -3731,6 +3731,7 @@ static const struct command_registration at91sam3_exec_command_handlers[] = {
.mode = COMMAND_EXEC,
.help = "Print information about the current at91sam3 chip"
"and its flash configuration.",
.usage = "",
},
{
.name = "slowclk",
......
......@@ -3212,6 +3212,7 @@ static const struct command_registration at91sam4_exec_command_handlers[] = {
.mode = COMMAND_EXEC,
.help = "Print information about the current at91sam4 chip"
"and its flash configuration.",
.usage = "",
},
{
.name = "slowclk",
......
......@@ -668,7 +668,8 @@ static const struct command_registration at91sam4l_exec_command_handlers[] = {
.name = "smap_reset_deassert",
.handler = sam4l_handle_reset_deassert,
.mode = COMMAND_EXEC,
.help = "deasert internal reset held by SMAP"
.help = "deassert internal reset held by SMAP",
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......
......@@ -1217,7 +1217,8 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
.name = "dsu_reset_deassert",
.handler = samd_handle_reset_deassert,
.mode = COMMAND_EXEC,
.help = "Deasert internal reset held by DSU."
.help = "Deassert internal reset held by DSU.",
.usage = "",
},
{
.name = "info",
......@@ -1225,6 +1226,7 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
.mode = COMMAND_EXEC,
.help = "Print information about the current at91samd chip "
"and its flash configuration.",
.usage = "",
},
{
.name = "chip-erase",
......@@ -1232,6 +1234,7 @@ static const struct command_registration at91samd_exec_command_handlers[] = {
.mode = COMMAND_EXEC,
.help = "Erase the entire Flash by using the Chip-"
"Erase feature in the Device Service Unit (DSU).",
.usage = "",
},
{
.name = "set-security",
......
......@@ -893,12 +893,14 @@ COMMAND_HANDLER(samd_handle_reset_deassert)
static const struct command_registration same5_exec_command_handlers[] = {
{
.name = "dsu_reset_deassert",
.usage = "",
.handler = samd_handle_reset_deassert,
.mode = COMMAND_EXEC,
.help = "Deasert internal reset held by DSU."
},
{
.name = "chip-erase",
.usage = "",
.handler = same5_handle_chip_erase_command,
.mode = COMMAND_EXEC,
.help = "Erase the entire Flash by using the Chip-"
......
......@@ -3127,6 +3127,7 @@ static const struct command_registration kinetis_exec_command_handlers[] = {
.mode = COMMAND_CONFIG,
.help = "Driver creates additional banks if device with two/four flash blocks is probed",
.handler = kinetis_create_banks_handler,
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......
......@@ -1118,6 +1118,7 @@ static const struct command_registration nrf5_exec_command_handlers[] = {
.handler = nrf5_handle_mass_erase_command,
.mode = COMMAND_EXEC,
.help = "Erase all flash contents of the chip.",
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......
......@@ -1856,6 +1856,7 @@ static const struct command_registration numicro_exec_command_handlers[] = {
.handler = numicro_handle_chip_erase_command,
.mode = COMMAND_EXEC,
.help = "chip erase through ISP.",
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......
......@@ -1239,12 +1239,14 @@ static const struct command_registration flash_config_command_handlers[] = {
.mode = COMMAND_CONFIG,
.handler = handle_flash_init_command,
.help = "Initialize flash devices.",
.usage = "",
},
{
.name = "banks",
.mode = COMMAND_ANY,
.handler = handle_flash_banks_command,
.help = "Display table with information about flash banks.",
.usage = "",
},
{
.name = "list",
......
......@@ -472,6 +472,7 @@ static const struct command_registration ioutil_command_handlers[] = {
.handler = handle_meminfo_command,
.mode = COMMAND_ANY,
.help = "display free heap space",
.usage = "",
},
#endif
{
......
......@@ -555,6 +555,7 @@ static const struct command_registration interface_command_handlers[] = {
.handler = handle_interface_list_command,
.mode = COMMAND_ANY,
.help = "List all built-in debug adapter interfaces (drivers)",
.usage = "",
},
{
.name = "reset_config",
......
......@@ -490,6 +490,7 @@ static const struct command_registration armjtagew_command_handlers[] = {
.handler = &armjtagew_handle_armjtagew_info_command,
.mode = COMMAND_EXEC,
.help = "query armjtagew info",
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......
......@@ -491,6 +491,7 @@ static const struct command_registration buspirate_command_handlers[] = {
.handler = &buspirate_handle_adc_command,
.mode = COMMAND_EXEC,
.help = "reads voltages on adc pins",
.usage = "",
},
{
.name = "buspirate_vreg",
......
......@@ -1772,13 +1772,15 @@ static const struct command_registration jlink_config_subcommand_handlers[] = {
.name = "reset",
.handler = &jlink_handle_config_reset_command,
.mode = COMMAND_EXEC,
.help = "undo configuration changes"
.help = "undo configuration changes",
.usage = "",
},
{
.name = "write",
.handler = &jlink_handle_config_write_command,
.mode = COMMAND_EXEC,
.help = "write configuration to the device"
.help = "write configuration to the device",
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......@@ -1820,13 +1822,15 @@ static const struct command_registration jlink_subcommand_handlers[] = {
.name = "freemem",
.handler = &jlink_handle_free_memory_command,
.mode = COMMAND_EXEC,
.help = "show free device memory"
.help = "show free device memory",
.usage = "",
},
{
.name = "hwstatus",
.handler = &jlink_handle_hwstatus_command,
.mode = COMMAND_EXEC,
.help = "show the hardware status"
.help = "show the hardware status",
.usage = "",
},
{
.name = "usb",
......
......@@ -215,6 +215,7 @@ static const struct command_registration opendous_command_handlers[] = {
.handler = &opendous_handle_opendous_info_command,
.mode = COMMAND_EXEC,
.help = "show opendous info",
.usage = "",
},
{
.name = "opendous_hw_jtag",
......
......@@ -170,6 +170,7 @@ static const struct command_registration pld_exec_command_handlers[] = {
.handler = handle_pld_devices_command,
.mode = COMMAND_EXEC,
.help = "list configured pld devices",
.usage = "",
},
{
.name = "load",
......
......@@ -3699,6 +3699,7 @@ static const struct command_registration gdb_command_handlers[] = {
.handler = handle_gdb_save_tdesc_command,
.mode = COMMAND_EXEC,
.help = "Save the target description file",
.usage = "",
},
COMMAND_REGISTRATION_DONE
};
......
......@@ -5890,6 +5890,7 @@ static const struct command_registration target_subcommand_handlers[] = {
.mode = COMMAND_CONFIG,
.handler = handle_target_init_command,
.help = "initialize targets",
.usage = "",
},
{
.name = "create",
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment