Commit 85944d41 authored by Thomas Kindler's avatar Thomas Kindler Committed by David Brownell
Browse files

stm32.cfg: remove reset_config

Here's a patch for the double-reset problem on STM32.  I've tested
downloading and debugging with GDB and Eclipse, and everything seems
to work fine.

This effectively sets reset_config to none. trst_only would also
be ok, but that's better left to a board configuration file since
not all boards wire it up.

The NVIC is used to trigger reset, which at least on this chip also
pulses nSRST so the whole system does get rest -- exactly once.

Signed-off-by: default avatarDavid Brownell <>
parent 627bd197
......@@ -26,9 +26,6 @@ jtag_khz 1000
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
if { [info exists CPUTAPID ] } {
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment