Commit 84ca4995 authored by Antonio Borneo's avatar Antonio Borneo Committed by Tomas Vanek

drivers/bcm2835gpio: fix usage messages

The notation "(tck tms tdi tdo)* " is incorrect, because it means the
quadruple of gpio can be repeated on the command-line.
The correct syntax of the command requires instead to provide either
all the four gpio numbers (in order to set the values) or to pass an
empty command-line (to dump the values previously set).

Change the .usage field to "[tck tms tdi tdo]".
Change similarly the corresponding .usage field for SWD command.
Add the .usage field for the commands that individually set each gpio
or gpio property.
Dump the previously set values when commands bcm2835gpio_speed_coeffs
or bcm2835gpio_peripheral_base are executed with empty command-line.

Change-Id: Ie45d8268c1de331aded0bb52d5e6b8f0e8766a5b
Signed-off-by: default avatarAntonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5019Reviewed-by: default avatarTomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
parent f9056d22
......@@ -300,6 +300,9 @@ COMMAND_HANDLER(bcm2835gpio_handle_speed_coeffs)
COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], speed_coeff);
COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], speed_offset);
}
command_print(CMD_CTX, "BCM2835 GPIO: speed_coeffs = %d, speed_offset = %d",
speed_coeff, speed_offset);
return ERROR_OK;
}
......@@ -307,6 +310,9 @@ COMMAND_HANDLER(bcm2835gpio_handle_peripheral_base)
{
if (CMD_ARGC == 1)
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], bcm2835_peri_base);
command_print(CMD_CTX, "BCM2835 GPIO: peripheral_base = 0x%08x",
bcm2835_peri_base);
return ERROR_OK;
}
......@@ -316,74 +322,84 @@ static const struct command_registration bcm2835gpio_command_handlers[] = {
.handler = &bcm2835gpio_handle_jtag_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for tck, tms, tdi, tdo. (in that order)",
.usage = "(tck tms tdi tdo)* ",
.usage = "[tck tms tdi tdo]",
},
{
.name = "bcm2835gpio_tck_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tck,
.mode = COMMAND_CONFIG,
.help = "gpio number for tck.",
.usage = "[tck]",
},
{
.name = "bcm2835gpio_tms_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tms,
.mode = COMMAND_CONFIG,
.help = "gpio number for tms.",
.usage = "[tms]",
},
{
.name = "bcm2835gpio_tdo_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tdo,
.mode = COMMAND_CONFIG,
.help = "gpio number for tdo.",
.usage = "[tdo]",
},
{
.name = "bcm2835gpio_tdi_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tdi,
.mode = COMMAND_CONFIG,
.help = "gpio number for tdi.",
.usage = "[tdi]",
},
{
.name = "bcm2835gpio_swd_nums",
.handler = &bcm2835gpio_handle_swd_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for swclk, swdio. (in that order)",
.usage = "(swclk swdio)* ",
.usage = "[swclk swdio]",
},
{
.name = "bcm2835gpio_swclk_num",
.handler = &bcm2835gpio_handle_swd_gpionum_swclk,
.mode = COMMAND_CONFIG,
.help = "gpio number for swclk.",
.usage = "[swclk]",
},
{
.name = "bcm2835gpio_swdio_num",
.handler = &bcm2835gpio_handle_swd_gpionum_swdio,
.mode = COMMAND_CONFIG,
.help = "gpio number for swdio.",
.usage = "[swdio]",
},
{
.name = "bcm2835gpio_srst_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_srst,
.mode = COMMAND_CONFIG,
.help = "gpio number for srst.",
.usage = "[srst]",
},
{
.name = "bcm2835gpio_trst_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_trst,
.mode = COMMAND_CONFIG,
.help = "gpio number for trst.",
.usage = "[trst]",
},
{
.name = "bcm2835gpio_speed_coeffs",
.handler = &bcm2835gpio_handle_speed_coeffs,
.mode = COMMAND_CONFIG,
.help = "SPEED_COEFF and SPEED_OFFSET for delay calculations.",
.usage = "[SPEED_COEFF SPEED_OFFSET]",
},
{
.name = "bcm2835gpio_peripheral_base",
.handler = &bcm2835gpio_handle_peripheral_base,
.mode = COMMAND_CONFIG,
.help = "peripheral base to access GPIOs (RPi1 0x20000000, RPi2 0x3F000000).",
.usage = "[base]",
},
COMMAND_REGISTRATION_DONE
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment