Commit 827053c7 authored by Aaron Carroll's avatar Aaron Carroll Committed by Øyvind Harboe
Browse files

openocd.texi: minor fixes in Reset Configuration


Signed-off-by: default avatarAaron Carroll <aaronc@cse.unsw.edu.au>
parent e26bda10
......@@ -2633,7 +2633,7 @@ with this signal behave exactly like pressing a RESET button.
@emph{JTAG TAP Reset} ... the @emph{TRST} hardware signal resets
just the TAP controllers connected to the JTAG adapter.
Such resets should not be visible to the rest of the system; resetting a
device's the TAP controller just puts that controller into a known state.
device's TAP controller just puts that controller into a known state.
@item
@emph{Emulation Reset} ... many devices can be reset through JTAG
commands. These resets are often distinguishable from system
......@@ -2673,7 +2673,7 @@ Use the @command{reset_config} @var{signals} options to say
when either of those signals is not connected.
When SRST is not available, your code might not be able to rely
on controllers having been fully reset during code startup.
Missing TRST is not a problem, since JTAG level resets can
Missing TRST is not a problem, since JTAG-level resets can
be triggered using with TMS signaling.
@item @emph{Signals shorted} ... Sometimes a chip, board, or
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment