Commit 7dc29156 authored by ntfreak's avatar ntfreak
Browse files

- change signature for adi_jtag_dp_scan and adi_jtag_dp_scan_u32 to use...

- change signature for adi_jtag_dp_scan and adi_jtag_dp_scan_u32 to use swjdp_common_t *swjdp instead of arm_jtag_t *jtag_info
- change SWJDP_IR/DR_APACC to DAP_IR/DR_APACC to conform with ARM_ADI docs.
- add swjdp->memaccess_tck field and code for extra tck clocks before accessing memory bus
- Set default memaccess value to 8 for Cortex-M3.
- Add dap memaccess command.
- document all armv7 dap cmds.
- Original patch submitted by Magnus Lundin [lundin@mlu.mine.nu].

git-svn-id: svn://svn.berlios.de/openocd/trunk@2005 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent 88b5c6da
......@@ -4137,6 +4137,33 @@ If @var{value} is defined, first assigns that.
@section ARMv7 Architecture
@subsection ARMv7 Debug Access Port (DAP) specific commands
@cindex ARMv7 Debug Access Port (DAP) specific commands
These commands are specific to ARM architecture v7 Debug Access Port (DAP),
included on cortex-m3 and cortex-a8 systems.
They are available in addition to other core-specific commands that may be available.
@deffn Command {dap info} [num]
Displays dap info for ap [num], default currently selected AP.
@end deffn
@deffn Command {dap apsel} [num]
Select a different AP [num] (default 0).
@end deffn
@deffn Command {dap apid} [num]
Displays id reg from AP [num], default currently selected AP.
@end deffn
@deffn Command {dap baseaddr} [num]
Displays debug base address from AP [num], default currently selected AP.
@end deffn
@deffn Command {dap memaccess} [value]
Displays the number of extra tck for mem-ap memory bus access [0-255].
If value is defined, first assigns that.
@end deffn
@subsection Cortex-M3 specific commands
@cindex Cortex-M3 specific commands
......
......@@ -59,34 +59,29 @@
***************************************************************************/
/* Scan out and in from target ordered u8 buffers */
int adi_jtag_dp_scan(arm_jtag_t *jtag_info, u8 instr, u8 reg_addr, u8 RnW, u8 *outvalue, u8 *invalue, u8 *ack)
int adi_jtag_dp_scan(swjdp_common_t *swjdp, u8 instr, u8 reg_addr, u8 RnW, u8 *outvalue, u8 *invalue, u8 *ack)
{
arm_jtag_t *jtag_info = swjdp->jtag_info;
scan_field_t fields[2];
u8 out_addr_buf;
jtag_add_end_state(TAP_IDLE);
arm_jtag_set_instr(jtag_info, instr, NULL);
/* Add specified number of tck clocks before accessing memory bus */
if ((instr == DAP_IR_APACC) && ((reg_addr == AP_REG_DRW)||((reg_addr&0xF0) == AP_REG_BD0) )&& (swjdp->memaccess_tck != 0))
jtag_add_runtest(swjdp->memaccess_tck, TAP_IDLE);
fields[0].tap = jtag_info->tap;
fields[0].num_bits = 3;
buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1));
fields[0].out_value = &out_addr_buf;
fields[0].in_value = ack;
fields[1].tap = jtag_info->tap;
fields[1].num_bits = 32;
fields[1].out_value = outvalue;
fields[1].in_value = invalue;
jtag_add_dr_scan(2, fields, TAP_INVALID);
......@@ -94,8 +89,9 @@ int adi_jtag_dp_scan(arm_jtag_t *jtag_info, u8 instr, u8 reg_addr, u8 RnW, u8 *o
}
/* Scan out and in from host ordered u32 variables */
int adi_jtag_dp_scan_u32(arm_jtag_t *jtag_info, u8 instr, u8 reg_addr, u8 RnW, u32 outvalue, u32 *invalue, u8 *ack)
int adi_jtag_dp_scan_u32(swjdp_common_t *swjdp, u8 instr, u8 reg_addr, u8 RnW, u32 outvalue, u32 *invalue, u8 *ack)
{
arm_jtag_t *jtag_info = swjdp->jtag_info;
scan_field_t fields[2];
u8 out_value_buf[4];
u8 out_addr_buf;
......@@ -103,20 +99,21 @@ int adi_jtag_dp_scan_u32(arm_jtag_t *jtag_info, u8 instr, u8 reg_addr, u8 RnW, u
jtag_add_end_state(TAP_IDLE);
arm_jtag_set_instr(jtag_info, instr, NULL);
/* Add specified number of tck clocks before accessing memory bus */
if ((instr == DAP_IR_APACC) && ((reg_addr == AP_REG_DRW)||((reg_addr&0xF0) == AP_REG_BD0) )&& (swjdp->memaccess_tck != 0))
jtag_add_runtest(swjdp->memaccess_tck, TAP_IDLE);
fields[0].tap = jtag_info->tap;
fields[0].num_bits = 3;
buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1));
fields[0].out_value = &out_addr_buf;
fields[0].in_value = ack;
fields[1].tap = jtag_info->tap;
fields[1].num_bits = 32;
buf_set_u32(out_value_buf, 0, 32, outvalue);
fields[1].out_value = out_value_buf;
fields[1].in_value = NULL;
if (invalue)
{
......@@ -136,14 +133,15 @@ int adi_jtag_dp_scan_u32(arm_jtag_t *jtag_info, u8 instr, u8 reg_addr, u8 RnW, u
/* scan_inout_check adds one extra inscan for DPAP_READ commands to read variables */
int scan_inout_check(swjdp_common_t *swjdp, u8 instr, u8 reg_addr, u8 RnW, u8 *outvalue, u8 *invalue)
{
adi_jtag_dp_scan(swjdp->jtag_info, instr, reg_addr, RnW, outvalue, NULL, NULL);
adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW, outvalue, NULL, NULL);
if ((RnW == DPAP_READ) && (invalue != NULL))
{
adi_jtag_dp_scan(swjdp->jtag_info, SWJDP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
adi_jtag_dp_scan(swjdp, DAP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
}
/* In TRANS_MODE_ATOMIC all SWJDP_IR_APACC transactions wait for ack=OK/FAULT and the check CTRL_STAT */
if ((instr == SWJDP_IR_APACC) && (swjdp->trans_mode == TRANS_MODE_ATOMIC))
/* In TRANS_MODE_ATOMIC all DAP_IR_APACC transactions wait for ack=OK/FAULT and the check CTRL_STAT */
if ((instr == DAP_IR_APACC) && (swjdp->trans_mode == TRANS_MODE_ATOMIC))
{
return swjdp_transaction_endcheck(swjdp);
}
......@@ -153,14 +151,15 @@ int scan_inout_check(swjdp_common_t *swjdp, u8 instr, u8 reg_addr, u8 RnW, u8 *o
int scan_inout_check_u32(swjdp_common_t *swjdp, u8 instr, u8 reg_addr, u8 RnW, u32 outvalue, u32 *invalue)
{
adi_jtag_dp_scan_u32(swjdp->jtag_info, instr, reg_addr, RnW, outvalue, NULL, NULL);
adi_jtag_dp_scan_u32(swjdp, instr, reg_addr, RnW, outvalue, NULL, NULL);
if ((RnW==DPAP_READ) && (invalue != NULL))
{
adi_jtag_dp_scan_u32(swjdp->jtag_info, SWJDP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
adi_jtag_dp_scan_u32(swjdp, DAP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
}
/* In TRANS_MODE_ATOMIC all SWJDP_IR_APACC transactions wait for ack=OK/FAULT and then check CTRL_STAT */
if ((instr == SWJDP_IR_APACC) && (swjdp->trans_mode == TRANS_MODE_ATOMIC))
/* In TRANS_MODE_ATOMIC all DAP_IR_APACC transactions wait for ack=OK/FAULT and then check CTRL_STAT */
if ((instr == DAP_IR_APACC) && (swjdp->trans_mode == TRANS_MODE_ATOMIC))
{
return swjdp_transaction_endcheck(swjdp);
}
......@@ -177,7 +176,7 @@ int swjdp_transaction_endcheck(swjdp_common_t *swjdp)
#if 0
/* Danger!!!! BROKEN!!!! */
scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
/* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here????
R956 introduced the check on return value here and now Michael Schwingen reports
that this code no longer works....
......@@ -191,7 +190,7 @@ int swjdp_transaction_endcheck(swjdp_common_t *swjdp)
/* Why??? second time it works??? */
#endif
scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
if ((retval=jtag_execute_queue())!=ERROR_OK)
return retval;
......@@ -216,7 +215,7 @@ int swjdp_transaction_endcheck(swjdp_common_t *swjdp)
return ERROR_JTAG_DEVICE_ERROR;
}
scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
if ((retval=jtag_execute_queue())!=ERROR_OK)
return retval;
swjdp->ack = swjdp->ack & 0x7;
......@@ -248,8 +247,8 @@ int swjdp_transaction_endcheck(swjdp_common_t *swjdp)
LOG_ERROR("SWJ-DP STICKY ERROR");
/* Clear Sticky Error Bits */
scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, DP_CTRL_STAT, DPAP_WRITE, swjdp->dp_ctrl_stat | SSTICKYORUN | SSTICKYERR, NULL);
scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_WRITE, swjdp->dp_ctrl_stat | SSTICKYORUN | SSTICKYERR, NULL);
scan_inout_check_u32(swjdp, DAP_IR_DPACC, DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
if ((retval=jtag_execute_queue())!=ERROR_OK)
return retval;
......@@ -278,12 +277,12 @@ int swjdp_transaction_endcheck(swjdp_common_t *swjdp)
int dap_dp_write_reg(swjdp_common_t *swjdp, u32 value, u8 reg_addr)
{
return scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, reg_addr, DPAP_WRITE, value, NULL);
return scan_inout_check_u32(swjdp, DAP_IR_DPACC, reg_addr, DPAP_WRITE, value, NULL);
}
int dap_dp_read_reg(swjdp_common_t *swjdp, u32 *value, u8 reg_addr)
{
return scan_inout_check_u32(swjdp, SWJDP_IR_DPACC, reg_addr, DPAP_READ, 0, value);
return scan_inout_check_u32(swjdp, DAP_IR_DPACC, reg_addr, DPAP_READ, 0, value);
}
int dap_ap_select(swjdp_common_t *swjdp,u8 apsel)
......@@ -294,7 +293,7 @@ int dap_ap_select(swjdp_common_t *swjdp,u8 apsel)
if (select != swjdp->apsel)
{
swjdp->apsel = select;
/* Switchin AP invalidates cached values */
/* Switching AP invalidates cached values */
swjdp->dp_select_value = -1;
swjdp->ap_csw_value = -1;
swjdp->ap_tar_value = -1;
......@@ -320,7 +319,7 @@ int dap_dp_bankselect(swjdp_common_t *swjdp,u32 ap_reg)
int dap_ap_write_reg(swjdp_common_t *swjdp, u32 reg_addr, u8* out_value_buf)
{
dap_dp_bankselect(swjdp, reg_addr);
scan_inout_check(swjdp, SWJDP_IR_APACC, reg_addr, DPAP_WRITE, out_value_buf, NULL);
scan_inout_check(swjdp, DAP_IR_APACC, reg_addr, DPAP_WRITE, out_value_buf, NULL);
return ERROR_OK;
}
......@@ -328,7 +327,7 @@ int dap_ap_write_reg(swjdp_common_t *swjdp, u32 reg_addr, u8* out_value_buf)
int dap_ap_read_reg(swjdp_common_t *swjdp, u32 reg_addr, u8 *in_value_buf)
{
dap_dp_bankselect(swjdp, reg_addr);
scan_inout_check(swjdp, SWJDP_IR_APACC, reg_addr, DPAP_READ, 0, in_value_buf);
scan_inout_check(swjdp, DAP_IR_APACC, reg_addr, DPAP_READ, 0, in_value_buf);
return ERROR_OK;
}
......@@ -338,7 +337,7 @@ int dap_ap_write_reg_u32(swjdp_common_t *swjdp, u32 reg_addr, u32 value)
buf_set_u32(out_value_buf, 0, 32, value);
dap_dp_bankselect(swjdp, reg_addr);
scan_inout_check(swjdp, SWJDP_IR_APACC, reg_addr, DPAP_WRITE, out_value_buf, NULL);
scan_inout_check(swjdp, DAP_IR_APACC, reg_addr, DPAP_WRITE, out_value_buf, NULL);
return ERROR_OK;
}
......@@ -346,7 +345,7 @@ int dap_ap_write_reg_u32(swjdp_common_t *swjdp, u32 reg_addr, u32 value)
int dap_ap_read_reg_u32(swjdp_common_t *swjdp, u32 reg_addr, u32 *value)
{
dap_dp_bankselect(swjdp, reg_addr);
scan_inout_check_u32(swjdp, SWJDP_IR_APACC, reg_addr, DPAP_READ, 0, value);
scan_inout_check_u32(swjdp, DAP_IR_APACC, reg_addr, DPAP_READ, 0, value);
return ERROR_OK;
}
......@@ -723,15 +722,15 @@ int mem_ap_read_buf_u32(swjdp_common_t *swjdp, u8 *buffer, int count, u32 addres
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
/* Scan out first read */
adi_jtag_dp_scan(swjdp->jtag_info, SWJDP_IR_APACC, AP_REG_DRW, DPAP_READ, 0, NULL, NULL);
adi_jtag_dp_scan(swjdp, DAP_IR_APACC, AP_REG_DRW, DPAP_READ, 0, NULL, NULL);
for (readcount = 0; readcount < blocksize - 1; readcount++)
{
/* Scan out read instruction and scan in previous value */
adi_jtag_dp_scan(swjdp->jtag_info, SWJDP_IR_APACC, AP_REG_DRW, DPAP_READ, 0, buffer + 4 * readcount, &swjdp->ack);
adi_jtag_dp_scan(swjdp, DAP_IR_APACC, AP_REG_DRW, DPAP_READ, 0, buffer + 4 * readcount, &swjdp->ack);
}
/* Scan in last value */
adi_jtag_dp_scan(swjdp->jtag_info, SWJDP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, buffer + 4 * readcount, &swjdp->ack);
adi_jtag_dp_scan(swjdp, DAP_IR_DPACC, DP_RDBUFF, DPAP_READ, 0, buffer + 4 * readcount, &swjdp->ack);
if (swjdp_transaction_endcheck(swjdp) == ERROR_OK)
{
wcount = wcount - blocksize;
......
......@@ -27,8 +27,8 @@
#include "register.h"
#include "arm_jtag.h"
#define SWJDP_IR_DPACC 0xA
#define SWJDP_IR_APACC 0xB
#define DAP_IR_DPACC 0xA
#define DAP_IR_APACC 0xB
#define DPAP_WRITE 0
#define DPAP_READ 1
......@@ -97,6 +97,8 @@ typedef struct swjdp_common_s
u8 trans_mode;
u8 trans_rw;
u8 ack;
/* extra tck clocks for memory bus access */
u32 memaccess_tck;
} swjdp_common_t;
/* Internal functions used in the module, partial transactions, use with caution */
......@@ -141,4 +143,6 @@ extern int handle_dap_info_command(struct command_context_s *cmd_ctx, char *cmd,
extern int handle_dap_apsel_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
extern int handle_dap_apid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
extern int handle_dap_baseaddr_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
extern int handle_dap_memaccess_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
#endif
......@@ -544,10 +544,11 @@ int armv7m_register_commands(struct command_context_s *cmd_ctx)
command_t *arm_adi_v5_dap_cmd;
arm_adi_v5_dap_cmd = register_command(cmd_ctx, NULL, "dap", NULL, COMMAND_ANY, "cortex dap specific commands");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info", handle_dap_info_command, COMMAND_EXEC, "dap info for ap [num], default currently selected AP");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel", handle_dap_apsel_command, COMMAND_EXEC, "select a different AP [num] (default 0)");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid", handle_dap_apid_command, COMMAND_EXEC, "return id reg from AP [num], default currently selected AP");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr", handle_dap_baseaddr_command, COMMAND_EXEC, "return debug base address from AP [num], default currently selected AP");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info", handle_dap_info_command, COMMAND_EXEC, "Displays dap info for ap [num], default currently selected AP");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel", handle_dap_apsel_command, COMMAND_EXEC, "Select a different AP [num] (default 0)");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid", handle_dap_apid_command, COMMAND_EXEC, "Displays id reg from AP [num], default currently selected AP");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr", handle_dap_baseaddr_command, COMMAND_EXEC, "Displays debug base address from AP [num], default currently selected AP");
register_command(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess", handle_dap_memaccess_command, COMMAND_EXEC, "set/get number of extra tck for mem-ap memory bus access [0-255]");
return ERROR_OK;
}
......@@ -786,6 +787,25 @@ int handle_dap_apsel_command(struct command_context_s *cmd_ctx, char *cmd, char
return retval;
}
int handle_dap_memaccess_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
target_t *target = get_current_target(cmd_ctx);
armv7m_common_t *armv7m = target->arch_info;
swjdp_common_t *swjdp = &armv7m->swjdp_info;
u32 memaccess_tck;
memaccess_tck = swjdp->memaccess_tck;
if (argc > 0)
{
memaccess_tck = strtoul(args[0], NULL, 0);
}
swjdp->memaccess_tck = memaccess_tck;
command_print(cmd_ctx, "memory bus access delay set to %i tck", swjdp->memaccess_tck);
return ERROR_OK;
}
int handle_dap_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
target_t *target = get_current_target(cmd_ctx);
......
......@@ -1564,9 +1564,12 @@ int cortex_m3_handle_target_request(void *priv)
int cortex_m3_init_arch_info(target_t *target, cortex_m3_common_t *cortex_m3, jtag_tap_t *tap)
{
int retval;
armv7m_common_t *armv7m;
armv7m = &cortex_m3->armv7m;
armv7m_init_arch_info(target, armv7m);
/* prepare JTAG information for the new target */
cortex_m3->jtag_info.tap = tap;
cortex_m3->jtag_info.scann_size = 4;
......@@ -1575,6 +1578,7 @@ int cortex_m3_init_arch_info(target_t *target, cortex_m3_common_t *cortex_m3, jt
armv7m->swjdp_info.ap_csw_value = -1;
armv7m->swjdp_info.ap_tar_value = -1;
armv7m->swjdp_info.jtag_info = &cortex_m3->jtag_info;
armv7m->swjdp_info.memaccess_tck = 8;
/* initialize arch-specific breakpoint handling */
......@@ -1590,13 +1594,17 @@ int cortex_m3_init_arch_info(target_t *target, cortex_m3_common_t *cortex_m3, jt
armv7m->pre_restore_context = NULL;
armv7m->post_restore_context = NULL;
armv7m_init_arch_info(target, armv7m);
armv7m->arch_info = cortex_m3;
armv7m->load_core_reg_u32 = cortex_m3_load_core_reg_u32;
armv7m->store_core_reg_u32 = cortex_m3_store_core_reg_u32;
target_register_timer_callback(cortex_m3_handle_target_request, 1, 1, target);
if ((retval = arm_jtag_setup_connection(&cortex_m3->jtag_info)) != ERROR_OK)
{
return retval;
}
return ERROR_OK;
}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment