Commit 6935e703 authored by ntfreak's avatar ntfreak
Browse files

- add missing svn props from r1299 commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1302 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent a8e12a95
# This is for the T-Home X300T / X301T IPTV box,
# which are based on IPTV reference designs from Kiss/Cisco KMM-32**
#
# It has Sigma Designs SMP8634 chip.
source [find target/smp8634.cfg]
$_TARGETNAME configure -event reset-init { x300t_init }
# 1MB CFI capable flash
# flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank cfi 0xac000000 0x100000 2 2 0
proc x300t_init { } {
# Setup SDRAM config and flash mapping
# map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
mww 0x6f010 0x48000000
}
# This is for the T-Home X300T / X301T IPTV box,
# which are based on IPTV reference designs from Kiss/Cisco KMM-32**
#
# It has Sigma Designs SMP8634 chip.
source [find target/smp8634.cfg]
$_TARGETNAME configure -event reset-init { x300t_init }
# 1MB CFI capable flash
# flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank cfi 0xac000000 0x100000 2 2 0
proc x300t_init { } {
# Setup SDRAM config and flash mapping
# map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
mww 0x6f010 0x48000000
}
telnet_port 4444
gdb_port 2001
interface parport
parport_port /dev/parport0
parport_cable dlc5
jtag_speed 0
telnet_port 4444
gdb_port 2001
interface parport
parport_port /dev/parport0
parport_cable dlc5
jtag_speed 0
# script for Sigma Designs SMP8634 (eventually even SMP8635)
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME smp8634
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
set _CPUTAPID 0x08630001
}
jtag_nsrst_delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst separate
# jtag scan chain
# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant
# script for Sigma Designs SMP8634 (eventually even SMP8635)
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME smp8634
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
set _CPUTAPID 0x08630001
}
jtag_nsrst_delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst separate
# jtag scan chain
# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment