Commit 61e1e525 authored by Freddie Chopin's avatar Freddie Chopin Committed by Øyvind Harboe
Browse files

Add another level of procedures to LPC2xxx initialization - procedures for...


Add another level of procedures to LPC2xxx initialization - procedures for specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else.
Signed-off-by: default avatarFreddie Chopin <freddie_chopin@op.pl>
parent 7ec55eb8
......@@ -2,8 +2,20 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 32kB flash and 8kB SRAM, clocked with 12MHz crystal
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2103 {core_freq_khz adapter_freq_khz} {
# 32kB flash and 8kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2103 0x4f1f0f0f 0x8000 lpc2000_v2 0x2000 12000 1500
setup_lpc2xxx lpc2103 0x4f1f0f0f 0x8000 lpc2000_v2 0x2000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 12MHz crystal
echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
# setup_lpc2103 <core_freq_khz> <adapter_freq_khz>
setup_lpc2103 12000 1500
}
......@@ -2,8 +2,20 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 256kB flash and 16kB SRAM, clocked with 12MHz crystal
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2124 {core_freq_khz adapter_freq_khz} {
# 256kB flash and 16kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2124 0x4f1f0f0f 0x40000 lpc2000_v1 0x4000 12000 1500
setup_lpc2xxx lpc2124 0x4f1f0f0f 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 12MHz crystal
echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
# setup_lpc2124 <core_freq_khz> <adapter_freq_khz>
setup_lpc2124 12000 1500
}
......@@ -2,8 +2,20 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 256kB flash and 16kB SRAM, clocked with 12MHz crystal
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2129 {core_freq_khz adapter_freq_khz} {
# 256kB flash and 16kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2129 0xcf1f0f0f 0x40000 lpc2000_v1 0x4000 12000 1500
setup_lpc2xxx lpc2129 0xcf1f0f0f 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 12MHz crystal
echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
# setup_lpc2129 <core_freq_khz> <adapter_freq_khz>
setup_lpc2129 12000 1500
}
......@@ -2,8 +2,20 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 500kB flash and 32kB SRAM, clocked with 12MHz crystal
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2148 {core_freq_khz adapter_freq_khz} {
# 500kB flash and 32kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2148 "0x3f0f0f0f 0x4f1f0f0f" 0x7d000 lpc2000_v2 0x8000 12000 1500
setup_lpc2xxx lpc2148 "0x3f0f0f0f 0x4f1f0f0f" 0x7d000 lpc2000_v2 0x8000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 12MHz crystal
echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
# setup_lpc2148 <core_freq_khz> <adapter_freq_khz>
setup_lpc2148 12000 1500
}
......@@ -2,10 +2,22 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 256kB flash and 16kB SRAM, clocked with 12MHz crystal
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2294 {core_freq_khz adapter_freq_khz} {
# 256kB flash and 16kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
# !! TAPID unknown !!
setup_lpc2xxx lpc2294 0xffffffff 0x40000 lpc2000_v1 0x4000 12000 1500
setup_lpc2xxx lpc2294 0xffffffff 0x40000 lpc2000_v1 0x4000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 12MHz crystal
echo "Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different."
# setup_lpc2294 <core_freq_khz> <adapter_freq_khz>
setup_lpc2294 12000 1500
}
......@@ -2,8 +2,20 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 504kB flash and 32kB SRAM, clocked with 4MHz internal oscillator
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2378 {core_freq_khz adapter_freq_khz} {
# 504kB flash and 32kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2378 0x4f1f0f0f 0x7e000 lpc2000_v2 0x8000 4000 500
setup_lpc2xxx lpc2378 0x4f1f0f0f 0x7e000 lpc2000_v2 0x8000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 4MHz internal oscillator
echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different."
# setup_lpc2378 <core_freq_khz> <adapter_freq_khz>
setup_lpc2378 4000 500
}
......@@ -2,8 +2,20 @@
source [find target/lpc2xxx.cfg]
proc init_targets {} {
# 504kB flash and 64kB SRAM, clocked with 4MHz internal oscillator
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2478 {core_freq_khz adapter_freq_khz} {
# 504kB flash and 64kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2478 0x4f1f0f0f 0x7e000 lpc2000_v2 0x10000 4000 500
setup_lpc2xxx lpc2478 0x4f1f0f0f 0x7e000 lpc2000_v2 0x10000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 4MHz internal oscillator
echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different."
# setup_lpc2478 <core_freq_khz> <adapter_freq_khz>
setup_lpc2478 4000 500
}
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment