Commit 5376bfd2 authored by oharboe's avatar oharboe
Browse files

Uwe Hermann <uwe@hermann-uwe.de> Drop non-A variants of ft2232 targets

git-svn-id: svn://svn.berlios.de/openocd/trunk@1499 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent 66db8e7b
......@@ -6,7 +6,7 @@
interface ft2232
ft2232_layout jtagkey
ft2232_device_desc "USB-A9260"
ft2232_device_desc "USB-A9260 A"
ft2232_vid_pid 0x0403 0x6010
script interface/calao-usb-a9260.cfg
script target/at91sam9260minimal.cfg
......
......@@ -5,7 +5,7 @@
#
interface ft2232
ft2232_device_desc "Flyswatter"
ft2232_device_desc "Flyswatter A"
ft2232_layout "flyswatter"
ft2232_vid_pid 0x0403 0x6010
jtag_speed 1
......
......@@ -4,8 +4,6 @@
# http://www.amontec.com/jtagkey-tiny.shtml
#
interface ft2232
ft2232_device_desc "Amontec JTAGkey"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
# The JTAGkey-tiny uses exactly the same config as the JTAGkey.
source [find interface/jtagkey.cfg]
#
# Luminary Micro Stellaris LM3S811 Evaluation Kit
#
# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
#
interface ft2232
ft2232_device_desc "Stellaris Evaluation Board"
ft2232_layout evb_lm3s811
ft2232_vid_pid 0x0403 0xbcd9
#
# Luminary Micro LM3S811 Evaluation Kit(s)
# Luminary Micro Stellaris LM3S811 Evaluation Kit
#
# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
#
......@@ -7,4 +7,5 @@
interface ft2232
ft2232_device_desc "Stellaris Evaluation Board A"
ft2232_layout evb_lm3s811
ft2232_vid_pid 0x0403 0xbcd9
......@@ -5,7 +5,7 @@
#
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG"
ft2232_device_desc "Olimex OpenOCD JTAG A"
ft2232_layout olimex-jtag
ft2232_vid_pid 0x15ba 0x0003
#
# Olimex ARM-USB-TINY
#
# http://www.olimex.com/dev/arm-usb-tiny.html
#
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG TINY A"
ft2232_layout olimex-jtag
ft2232_vid_pid 0x15ba 0x0004
......@@ -4,12 +4,8 @@
# http://www.olimex.com/dev/arm-usb-tiny.html
#
# TODO: FIXME
# Linux USB tends to see the device description without the 'A' as in target/olimex-jtag-tiny.cfg,
# but Windows still needs the 'A'. This is a replacement for Linux users.
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG TINY"
ft2232_device_desc "Olimex OpenOCD JTAG TINY A"
ft2232_layout olimex-jtag
ft2232_vid_pid 0x15ba 0x0004
......@@ -6,7 +6,7 @@
interface ft2232
ft2232_vid_pid 0x0403 0x6010
ft2232_device_desc "Dual RS232"
ft2232_device_desc "Dual RS232 A"
ft2232_layout "oocdlink"
ft2232_latency 2
# 6/(1+n) Mhz TCLK
......
......@@ -7,5 +7,6 @@
interface ft2232
ft2232_layout sheevaplug
ft2232_vid_pid 0x0403 0x6010
# TODO: Add ft2232_device_desc?
jtag_khz 3000
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment