Commit 39070c29 authored by duane's avatar duane
Browse files

Typos in config files found by Sergey Lapin

git-svn-id: svn://svn.berlios.de/openocd/trunk@1220 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent cb8895f9
......@@ -29,7 +29,7 @@ reset_config srst_only srst_pulls_trst
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGENAME -variant arm7tdmi
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
$_TARGETNAME configure -event gdb-flash-erase-start {
......
......@@ -9,7 +9,7 @@ source [find target/at91sam9260minimal.cfg]
# Target configuration
######################
$_TARGET_NAME configure -event reset-init {
$_TARGETNAME configure -event reset-init {
# at reset chip runs at 32khz
jtag_khz 8
mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset
......
......@@ -18,7 +18,7 @@ if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
set _CPUTAPID 0xffffffff
set _CPUTAPID 0x0792603f
}
reset_config trst_and_srst
......@@ -37,6 +37,6 @@ set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
# Internal sram1 memory
$_TARGET_NAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment