Commit 327fafc6 authored by Spencer Oliver's avatar Spencer Oliver
Browse files

cfg: add stlink pseudo stm32 targets



Change-Id: I71253c2090162b1214bbbb37396735bb9128f920
Signed-off-by: default avatarSpencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/334


Tested-by: jenkins
Reviewed-by: default avatarFreddie Chopin <freddie.chopin@gmail.com>
parent 51f06253
# This is an STM32F4 discovery board with a single STM32F407VGT6 chip.
# http://www.st.com/internet/evalboard/product/252419.jsp
source [find interface/stlink-usb.cfg]
source [find target/stm32f4x_stlink.cfg]
#
# stm32 stlink pseudo target
#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME stm32f1x
}
# Work-area is a space in RAM used for flash programming
# By default use 16kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x4000
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
# this is the SW-DP tap id not the jtag tap id
set _CPUTAPID 0x1ba01477
}
stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
#
# STM32f1x stlink pseudo target
#
set CHIPNAME stm32f1x
set CPUTAPID 0x1ba01477
set WORKAREASIZE 0x4000
source [find target/stm32_stlink.cfg]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
#
# STM32f2x stlink pseudo target
#
#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME stm32
}
# Work-area is a space in RAM used for flash programming
# By default use 64kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x10000
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x2ba01477
}
stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
set CHIPNAME stm32f2x
set CPUTAPID 0x2ba01477
set WORKAREASIZE 0x10000
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
source [find target/stm32_stlink.cfg]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stm32f2x 0x08000000 0 0 0 $_TARGETNAME
flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
#
# STM32f4x stlink pseudo target
#
set CHIPNAME stm32f4x
set CPUTAPID 0x2ba01477
set WORKAREASIZE 0x10000
source [find target/stm32_stlink.cfg]
# stm32f4x family uses stm32f2x driver
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stm32f2x 0 0 0 0 $_TARGETNAME
#
# STM32lx stlink pseudo target
#
set CHIPNAME stm32lx
set CPUTAPID 0x4ba00477
set WORKAREASIZE 0x3800
source [find target/stm32_stlink.cfg]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stm32lx 0 0 0 0 $_TARGETNAME
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment