Commit 2ec5bd28 authored by mifi's avatar mifi
Browse files

- corrected working_area of LPC2129 script

- added LPC2148 script
- corrected size of the working_area of the LPC2294 script

git-svn-id: svn://svn.berlios.de/openocd/trunk@245 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent fe024012
......@@ -1323,20 +1323,19 @@ working_area 0 0x20000000 16384 nobackup
flash bank stm32x 0x08000000 0x00010000 0 0 0
@end smallexample
@section LPC2294 Script
@cindex LPC2294 Script
The following script was used with an Amontec JTAGkey and a LPC2294 cpu:
@section LPC2129 Script
@cindex LPC2129 Script
The following script was used with an wiggler PP and a LPC-2129 cpu:
@smallexample
#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 2
interface parport
parport_port 0x378
parport_cable wiggler
jtag_speed 0
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
......@@ -1353,15 +1352,15 @@ daemon_startup reset
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30
working_area 0 0x40000000 0x40000 nobackup
working_area 0 0x40000000 0x4000 nobackup
#flash configuration
#flash bank <driver> <base> <size> <chip_width> <bus_width>
flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
@end smallexample
@section AT91R40008 Script
@cindex AT91R40008 Script
The following script was used with an Amontec JTAGkey and a AT91R40008 cpu:
@section LPC2148 Script
@cindex LPC2148 Script
The following script was used with an Amontec JTAGkey and a LPC2148 cpu:
@smallexample
#daemon configuration
telnet_port 4444
......@@ -1372,12 +1371,10 @@ interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
jtag_speed 3
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config srst_only srst_pulls_trst
reset_config trst_and_srst srst_pulls_trst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
......@@ -1388,23 +1385,29 @@ daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30
working_area 0 0x40000000 0x8000 nobackup
#flash configuration
flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v1 14765 calc_checksum
@end smallexample
@section LPC2129 Script
@cindex LPC2129 Script
The following script was used with an wiggler PP and a LPC-2129 cpu:
@section LPC2294 Script
@cindex LPC2294 Script
The following script was used with an Amontec JTAGkey and a LPC2294 cpu:
@smallexample
#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface parport
parport_port 0x378
parport_cable wiggler
jtag_speed 0
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 3
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
......@@ -1421,12 +1424,45 @@ daemon_startup reset
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30
working_area 0 0x00000000 0x400000 nobackup
working_area 0 0x40000000 0x4000 nobackup
#flash bank <driver> <base> <size> <chip_width> <bus_width>
#flash configuration
flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
@end smallexample
@section AT91R40008 Script
@cindex AT91R40008 Script
The following script was used with an Amontec JTAGkey and a AT91R40008 cpu:
@smallexample
#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config srst_only srst_pulls_trst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi
run_and_halt_time 0 30
@end smallexample
@section AT91SAM7s Script
@cindex AT91SAM7s Script
The following script was used with an Olimex ARM-JTAG-OCD and a AT91SAM7S64 cpu:
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment