Commit 2e210ee4 authored by dbrownell's avatar dbrownell
Browse files

Streamline Capture-IR handling and integrity test.

Change the handling of the "-ircapture" and "-irmask" parameters
to be slightly more sensible, given that the JTAG spec describes
what is required, and that we already require that conformance in
one place.  IR scan returns some bitstring with LSBs "01".

 - First, provide and use default values that satisfy the IEEE spec.
   Existing TAP configs will override the defaults, but those parms
   are no longer required.

 - Second, warn if any TAP gets set up to violate the JTAG spec.
   It's likely a bug, but maybe not; else this should be an error.
   Improve the related diagnostics to say which TAP is affected.

And associated minor fixes/cleanups to comments and diagnostics.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2758 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent ad43374c
......@@ -2309,19 +2309,9 @@ a JTAG TAP; that TAP should be named @code{sdma}.
Every TAP requires at least the following @var{configparams}:
@itemize @bullet
@item @code{-ircapture} @var{NUMBER}
@*The bit pattern loaded by the TAP into the JTAG shift register
on entry to the @sc{ircapture} state, such as 0x01.
JTAG requires the two LSBs of this value to be 01.
The value is used to verify that instruction scans work correctly.
@item @code{-irlen} @var{NUMBER}
@*The length in bits of the
instruction register, such as 4 or 5 bits.
@item @code{-irmask} @var{NUMBER}
@*A mask for the IR register.
For some devices, there are bits in the IR that aren't used.
This lets OpenOCD mask them off when doing IDCODE comparisons.
In general, this should just be all ones for the size of the IR.
@end itemize
A TAP may also provide optional @var{configparams}:
......@@ -2340,6 +2330,18 @@ found when the JTAG chain is examined.
These codes are not required by all JTAG devices.
@emph{Repeat the option} as many times as required if more than one
ID code could appear (for example, multiple versions).
@item @code{-ircapture} @var{NUMBER}
@*The bit pattern loaded by the TAP into the JTAG shift register
on entry to the @sc{ircapture} state, such as 0x01.
JTAG requires the two LSBs of this value to be 01.
By default, @code{-ircapture} and @code{-irmask} are set
up to verify that two-bit value; but you may provide
additional bits, if you know them.
@item @code{-irmask} @var{NUMBER}
@*A mask used with @code{-ircapture}
to verify that instruction scans work correctly.
Such scans are not used by OpenOCD except to verify that
there seems to be no problems with JTAG scan chain operations.
@end itemize
@end deffn
......
......@@ -242,13 +242,15 @@ static int jim_newtap_cmd(Jim_GetOptInfo *goi)
LOG_DEBUG("Creating New Tap, Chip: %s, Tap: %s, Dotted: %s, %d params",
pTap->chip, pTap->tapname, pTap->dotted_name, goi->argc);
/* deal with options */
#define NTREQ_IRLEN 1
#define NTREQ_IRCAPTURE 2
#define NTREQ_IRMASK 4
/* IEEE specifies that the two LSBs of an IR scan are 01, so make
* that the default. The "-irlen" and "-irmask" options are only
* needed to cope with nonstandard TAPs, or to specify more bits.
*/
pTap->ir_capture_mask = 0x03;
pTap->ir_capture_value = 0x01;
/* clear them as we find them */
reqbits = (NTREQ_IRLEN | NTREQ_IRCAPTURE | NTREQ_IRMASK);
/* clear flags for "required options" them as we find them */
reqbits = 1;
while (goi->argc) {
e = Jim_GetOpt_Nvp(goi, opts, &n);
......@@ -308,31 +310,39 @@ static int jim_newtap_cmd(Jim_GetOptInfo *goi)
switch (n->value) {
case NTAP_OPT_IRLEN:
if (w > (jim_wide) (8 * sizeof(pTap->ir_capture_value)))
LOG_WARNING("huge IR length %d", (int) w);
LOG_WARNING("%s: huge IR length %d",
pTap->dotted_name,
(int) w);
pTap->ir_length = w;
reqbits &= (~(NTREQ_IRLEN));
reqbits = 0;
break;
case NTAP_OPT_IRMASK:
if (is_bad_irval(pTap->ir_length, w)) {
LOG_ERROR("IR mask %x too big",
LOG_ERROR("%s: IR mask %x too big",
pTap->dotted_name,
(int) w);
free((void *)pTap->dotted_name);
free(pTap);
return ERROR_FAIL;
}
if ((w & 3) != 3)
LOG_WARNING("%s: nonstandard IR mask",
pTap->dotted_name);
pTap->ir_capture_mask = w;
reqbits &= (~(NTREQ_IRMASK));
break;
case NTAP_OPT_IRCAPTURE:
if (is_bad_irval(pTap->ir_length, w)) {
LOG_ERROR("IR capture %x too big",
LOG_ERROR("%s: IR capture %x too big",
pTap->dotted_name,
(int) w);
free((void *)pTap->dotted_name);
free(pTap);
return ERROR_FAIL;
}
if ((w & 3) != 1)
LOG_WARNING("%s: nonstandard IR value",
pTap->dotted_name);
pTap->ir_capture_value = w;
reqbits &= (~(NTREQ_IRCAPTURE));
break;
}
} /* switch (n->value) */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment