Commit 1f28b934 authored by oharboe's avatar oharboe
Browse files

David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick...

David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick board config behave better:
source the STM32 target config instead of using a private clone

git-svn-id: svn://svn.berlios.de/openocd/trunk@2352 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent 26807d19
# Hitex stm32 performance stick
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME stm32_hitex
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
# set jtag speed
jtag_khz 500
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
# The CPU
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# See STM Document RM0008
# Section 26.6.3
set _CPUTAPID 0x3ba00477
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# The boundery scan register, leave the "expected-id" undefined.
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1
set CHIPNAME stm32_hitex
source [find target/stm32.cfg]
# configure str750 connected to jtag chain
# FIXME -- source [find target/str750.cfg] after cleaning that up
jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
#
flash bank stm32x 0 0 0 0 0
# For more information about the configuration files, take a look at:
# openocd.texi
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment