Commit 06433b2d authored by ntfreak's avatar ntfreak
Browse files

- updated svn:eol-style prop to native

git-svn-id: svn://svn.berlios.de/openocd/trunk@418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent 5a091020
target remote localhost:3333
monitor reset
monitor sleep 500
monitor poll
monitor soft_reset_halt
monitor arm7_9 sw_bkpts enable
monitor mww 0xE01FC040 0x0002
monitor mdw 0xE01FC040
load
break main
target remote localhost:3333
monitor reset
monitor sleep 500
monitor poll
monitor soft_reset_halt
monitor arm7_9 sw_bkpts enable
monitor mww 0xE01FC040 0x0002
monitor mdw 0xE01FC040
load
break main
continue
\ No newline at end of file
target remote localhost:3333
monitor reset
monitor sleep 500
monitor poll
monitor soft_reset_halt
monitor arm7_9 force_hw_bkpts enable
monitor mww 0xE01FC040 0x0002
monitor mdw 0xE01FC040
load
break main
target remote localhost:3333
monitor reset
monitor sleep 500
monitor poll
monitor soft_reset_halt
monitor arm7_9 force_hw_bkpts enable
monitor mww 0xE01FC040 0x0002
monitor mdw 0xE01FC040
load
break main
continue
\ No newline at end of file
#daemon configuration
telnet_port 4444
gdb_port 3333
# tell gdb our flash memory map
# and enable flash programming
gdb_memory_map enable
gdb_flash_program enable
#interface
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 3
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30
working_area 0 0x40000000 0x4000 nobackup
#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
#daemon configuration
telnet_port 4444
gdb_port 3333
# tell gdb our flash memory map
# and enable flash programming
gdb_memory_map enable
gdb_flash_program enable
#interface
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 3
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30
working_area 0 0x40000000 0x4000 nobackup
#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
/****************************************************************************
* Copyright (c) 2006 by Michael Fischer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
****************************************************************************
*
* History:
*
* 18.12.06 mifi First Version
****************************************************************************/
ENTRY(ResetHandler)
SEARCH_DIR(.)
/*
* Define stack size here
*/
FIQ_STACK_SIZE = 0x0100;
IRQ_STACK_SIZE = 0x0100;
ABT_STACK_SIZE = 0x0100;
UND_STACK_SIZE = 0x0100;
SVC_STACK_SIZE = 0x0400;
/*
* This file, olimex_lpcp2148_ram.ld, locate the program in the internal
* ram of the LPC2148. For more information about the memory of the LPC2148
* take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
* Reference is made to the user manual from 25 July 2006 Rev. 02
*
* Take a look at page 8, section 1.Memory maps
*/
MEMORY
{
ram : org = 0x40000000, len = 32k
}
/*
* Do not change the next code
*/
SECTIONS
{
.text :
{
*(.vectors);
. = ALIGN(4);
*(.init);
. = ALIGN(4);
*(.text);
. = ALIGN(4);
*(.rodata);
. = ALIGN(4);
*(.rodata*);
. = ALIGN(4);
*(.glue_7t);
. = ALIGN(4);
*(.glue_7);
. = ALIGN(4);
etext = .;
} > ram
.data :
{
PROVIDE (__data_start = .);
*(.data)
. = ALIGN(4);
edata = .;
_edata = .;
PROVIDE (__data_end = .);
} > ram
.bss :
{
PROVIDE (__bss_start = .);
*(.bss)
*(COMMON)
. = ALIGN(4);
PROVIDE (__bss_end = .);
. = ALIGN(256);
PROVIDE (__stack_start = .);
PROVIDE (__stack_fiq_start = .);
. += FIQ_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_fiq_end = .);
PROVIDE (__stack_irq_start = .);
. += IRQ_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_irq_end = .);
PROVIDE (__stack_abt_start = .);
. += ABT_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_abt_end = .);
PROVIDE (__stack_und_start = .);
. += UND_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_und_end = .);
PROVIDE (__stack_svc_start = .);
. += SVC_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_svc_end = .);
PROVIDE (__stack_end = .);
PROVIDE (__heap_start = .);
} > ram
}
/*** EOF ***/
/****************************************************************************
* Copyright (c) 2006 by Michael Fischer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
****************************************************************************
*
* History:
*
* 18.12.06 mifi First Version
****************************************************************************/
ENTRY(ResetHandler)
SEARCH_DIR(.)
/*
* Define stack size here
*/
FIQ_STACK_SIZE = 0x0100;
IRQ_STACK_SIZE = 0x0100;
ABT_STACK_SIZE = 0x0100;
UND_STACK_SIZE = 0x0100;
SVC_STACK_SIZE = 0x0400;
/*
* This file, olimex_lpcp2148_ram.ld, locate the program in the internal
* ram of the LPC2148. For more information about the memory of the LPC2148
* take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
* Reference is made to the user manual from 25 July 2006 Rev. 02
*
* Take a look at page 8, section 1.Memory maps
*/
MEMORY
{
ram : org = 0x40000000, len = 32k
}
/*
* Do not change the next code
*/
SECTIONS
{
.text :
{
*(.vectors);
. = ALIGN(4);
*(.init);
. = ALIGN(4);
*(.text);
. = ALIGN(4);
*(.rodata);
. = ALIGN(4);
*(.rodata*);
. = ALIGN(4);
*(.glue_7t);
. = ALIGN(4);
*(.glue_7);
. = ALIGN(4);
etext = .;
} > ram
.data :
{
PROVIDE (__data_start = .);
*(.data)
. = ALIGN(4);
edata = .;
_edata = .;
PROVIDE (__data_end = .);
} > ram
.bss :
{
PROVIDE (__bss_start = .);
*(.bss)
*(COMMON)
. = ALIGN(4);
PROVIDE (__bss_end = .);
. = ALIGN(256);
PROVIDE (__stack_start = .);
PROVIDE (__stack_fiq_start = .);
. += FIQ_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_fiq_end = .);
PROVIDE (__stack_irq_start = .);
. += IRQ_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_irq_end = .);
PROVIDE (__stack_abt_start = .);
. += ABT_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_abt_end = .);
PROVIDE (__stack_und_start = .);
. += UND_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_und_end = .);
PROVIDE (__stack_svc_start = .);
. += SVC_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_svc_end = .);
PROVIDE (__stack_end = .);
PROVIDE (__heap_start = .);
} > ram
}
/*** EOF ***/
/****************************************************************************
* Copyright (c) 2006 by Michael Fischer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
****************************************************************************
*
* History:
*
* 26.01.08 mifi First Version
****************************************************************************/
ENTRY(ResetHandler)
SEARCH_DIR(.)
/*
* Define stack size here
*/
FIQ_STACK_SIZE = 0x0100;
IRQ_STACK_SIZE = 0x0100;
ABT_STACK_SIZE = 0x0100;
UND_STACK_SIZE = 0x0100;
SVC_STACK_SIZE = 0x0400;
/*
* This file, olimex_lpcp2148_ram.ld, locate the program in the internal
* ram of the LPC2148. For more information about the memory of the LPC2148
* take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
* Reference is made to the user manual from 25 July 2006 Rev. 02
*
* Take a look at page 8, section 1.Memory maps
*/
MEMORY
{
rom : org = 0x00000000, len = 512k
ram : org = 0x40000000, len = 32k
}
/*
* Do not change the next code
*/
SECTIONS
{
.text :
{
*(.vectors);
. = ALIGN(4);
*(.init);
. = ALIGN(4);
*(.text);
. = ALIGN(4);
*(.rodata);
. = ALIGN(4);
*(.rodata*);
. = ALIGN(4);
*(.glue_7t);
. = ALIGN(4);
*(.glue_7);
. = ALIGN(4);
etext = .;
} > rom
.data :
{
PROVIDE (__data_start = .);
*(.data)
. = ALIGN(4);
edata = .;
_edata = .;
PROVIDE (__data_end = .);
} > ram
.bss :
{
PROVIDE (__bss_start = .);
*(.bss)
*(COMMON)
. = ALIGN(4);
PROVIDE (__bss_end = .);
. = ALIGN(256);
PROVIDE (__stack_start = .);
PROVIDE (__stack_fiq_start = .);
. += FIQ_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_fiq_end = .);
PROVIDE (__stack_irq_start = .);
. += IRQ_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_irq_end = .);
PROVIDE (__stack_abt_start = .);
. += ABT_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_abt_end = .);
PROVIDE (__stack_und_start = .);
. += UND_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_und_end = .);
PROVIDE (__stack_svc_start = .);
. += SVC_STACK_SIZE;
. = ALIGN(4);
PROVIDE (__stack_svc_end = .);
PROVIDE (__stack_end = .);
PROVIDE (__heap_start = .);
} > ram
}
/*** EOF ***/
/****************************************************************************
* Copyright (c) 2006 by Michael Fischer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
****************************************************************************
*
* History:
*
* 26.01.08 mifi First Version
****************************************************************************/
ENTRY(ResetHandler)
SEARCH_DIR(.)
/*
* Define stack size here
*/
FIQ_STACK_SIZE = 0x0100;
IRQ_STACK_SIZE = 0x0100;
ABT_STACK_SIZE = 0x0100;
UND_STACK_SIZE = 0x0100;
SVC_STACK_SIZE = 0x0400;
/*
* This file, olimex_lpcp2148_ram.ld, locate the program in the internal
* ram of the LPC2148. For more information about the memory of the LPC2148
* take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
* Reference is made to the user manual from 25 July 2006 Rev. 02
*
* Take a look at page 8, section 1.Memory maps
*/
MEMORY
{
rom : org = 0x00000000, len = 512k
ram : org = 0x40000000, len = 32k
}
/*
* Do not change the next code
*/
SECTIONS
{
.text :
{
*(.vectors);
. = ALIGN(4);
*(.init);
. = ALIGN(4);