nit: more LOG_* \n fixes

Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages

Remove LOG_INFO_N
LOG_INFO_N was only used once and had a \n at the end

Change LOG_USER_N calls that end with \n to LOG_USER

src/flash/nand/at91sam9.c

@@ -513,7 +513,7 @@ NAND_DEVICE_COMMAND_HANDLER(at91sam9_nand_device_command)
 	unsigned long chip = 0, ecc = 0;
 	struct at91sam9_nand *info = NULL;
 
-	LOG_DEBUG("AT91SAM9 NAND Device Command\n");
+	LOG_DEBUG("AT91SAM9 NAND Device Command");
 
 	if (CMD_ARGC < 3 || CMD_ARGC > 4) {
 		LOG_ERROR("parameters: %s target chip_addr", CMD_ARGV[0]);

src/flash/nand/s3c2440.c

@@ -93,7 +93,7 @@ int s3c2440_read_block_data(struct nand_device *nand, uint8_t *data, int data_si
 	uint32_t nfdata = s3c24xx_info->data;
 	uint32_t tmp;
 
-	LOG_INFO("%s: reading data: %p, %p, %d\n", __func__, nand, data, data_size);
+	LOG_INFO("%s: reading data: %p, %p, %d", __func__, nand, data, data_size);
 
 	if (target->state != TARGET_HALTED) {
 		LOG_ERROR("target must be halted to use S3C24XX NAND flash controller");

src/flash/nor/aduc702x.c

@@ -105,7 +105,7 @@ static int aduc702x_erase(struct flash_bank *bank, int first, int last)
 
 	/* mass erase */
 	if (((first | last) == 0) || ((first == 0) && (last >= bank->num_sectors))) {
-		LOG_DEBUG("performing mass erase.\n");
+		LOG_DEBUG("performing mass erase.");
 		target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEDAT, 0x3cff);
 		target_write_u16(target, ADUC702x_FLASH + ADUC702x_FLASH_FEEADR, 0xffc3);
 		target_write_u8(target, ADUC702x_FLASH + ADUC702x_FLASH_FEECON, 0x06);
@@ -117,7 +117,7 @@ static int aduc702x_erase(struct flash_bank *bank, int first, int last)
 			return ERROR_FLASH_OPERATION_FAILED;
 		}
 
-		LOG_DEBUG("mass erase successful.\n");
+		LOG_DEBUG("mass erase successful.");
 		return ERROR_OK;
 	} else {
                 unsigned long adr;
@@ -137,7 +137,7 @@ static int aduc702x_erase(struct flash_bank *bank, int first, int last)
                                 return ERROR_FLASH_SECTOR_NOT_ERASED;
                         }
 
-                        LOG_DEBUG("erased sector at address 0x%08lX\n", adr);
+                        LOG_DEBUG("erased sector at address 0x%08lX", adr);
                 }
         }
 
@@ -336,7 +336,7 @@ static int aduc702x_write_single(struct flash_bank *bank, uint8_t *buffer, uint3
 		}
 
 	}
-        LOG_DEBUG("wrote %d bytes at address 0x%08lX\n", (int)count, (unsigned long)(offset + x));
+        LOG_DEBUG("wrote %d bytes at address 0x%08lX", (int)count, (unsigned long)(offset + x));
 
         aduc702x_set_write_enable(target, 0);
 

src/flash/nor/at91sam3.c

@@ -1459,16 +1459,16 @@ sam3_explain_ckgr_mor(struct sam3_chip *pChip)
 	uint32_t rcen;
 
 	v = sam3_reg_fieldname(pChip, "MOSCXTEN", pChip->cfg.CKGR_MOR, 0, 1);
-	LOG_USER_N("(main xtal enabled: %s)\n",
+	LOG_USER("(main xtal enabled: %s)",
 				  _yes_or_no(v));
 	v = sam3_reg_fieldname(pChip, "MOSCXTBY", pChip->cfg.CKGR_MOR, 1, 1);
-	LOG_USER_N("(main osc bypass: %s)\n",
+	LOG_USER("(main osc bypass: %s)",
 				  _yes_or_no(v));
 	rcen = sam3_reg_fieldname(pChip, "MOSCRCEN", pChip->cfg.CKGR_MOR, 2, 1);
-	LOG_USER_N("(onchip RC-OSC enabled: %s)\n",
+	LOG_USER("(onchip RC-OSC enabled: %s)",
 				  _yes_or_no(rcen));
 	v = sam3_reg_fieldname(pChip, "MOSCRCF", pChip->cfg.CKGR_MOR, 4, 3);
-	LOG_USER_N("(onchip RC-OSC freq: %s)\n",
+	LOG_USER("(onchip RC-OSC freq: %s)",
 				  _rc_freq[v]);
 
 	pChip->cfg.rc_freq = 0;
@@ -1489,14 +1489,14 @@ sam3_explain_ckgr_mor(struct sam3_chip *pChip)
 	}
 
 	v = sam3_reg_fieldname(pChip,"MOSCXTST", pChip->cfg.CKGR_MOR, 8, 8);
-	LOG_USER_N("(startup clks, time= %f uSecs)\n",
+	LOG_USER("(startup clks, time= %f uSecs)",
 				  ((float)(v * 1000000)) / ((float)(pChip->cfg.slow_freq)));
 	v = sam3_reg_fieldname(pChip, "MOSCSEL", pChip->cfg.CKGR_MOR, 24, 1);
-	LOG_USER_N("(mainosc source: %s)\n",
+	LOG_USER("(mainosc source: %s)",
 				  v ? "external xtal" : "internal RC");
 
 	v = sam3_reg_fieldname(pChip,"CFDEN", pChip->cfg.CKGR_MOR, 25, 1);
-	LOG_USER_N("(clock failure enabled: %s)\n",
+	LOG_USER("(clock failure enabled: %s)",
 				 _yes_or_no(v));
 }
 
@@ -1513,16 +1513,16 @@ sam3_explain_chipid_cidr(struct sam3_chip *pChip)
 	LOG_USER_N("\n");
 
 	v = sam3_reg_fieldname(pChip, "EPROC", pChip->cfg.CHIPID_CIDR, 5, 3);
-	LOG_USER_N("%s\n", eproc_names[v]);
+	LOG_USER("%s", eproc_names[v]);
 
 	v = sam3_reg_fieldname(pChip, "NVPSIZE", pChip->cfg.CHIPID_CIDR, 8, 4);
-	LOG_USER_N("%s\n", nvpsize[v]);
+	LOG_USER("%s", nvpsize[v]);
 
 	v = sam3_reg_fieldname(pChip, "NVPSIZE2", pChip->cfg.CHIPID_CIDR, 12, 4);
-	LOG_USER_N("%s\n", nvpsize2[v]);
+	LOG_USER("%s", nvpsize2[v]);
 
 	v = sam3_reg_fieldname(pChip, "SRAMSIZE", pChip->cfg.CHIPID_CIDR, 16,4);
-	LOG_USER_N("%s\n", sramsize[ v ]);
+	LOG_USER("%s", sramsize[ v ]);
 
 	v = sam3_reg_fieldname(pChip, "ARCH", pChip->cfg.CHIPID_CIDR, 20, 8);
 	cp = _unknown;
@@ -1533,13 +1533,13 @@ sam3_explain_chipid_cidr(struct sam3_chip *pChip)
 		}
 	}
 
-	LOG_USER_N("%s\n", cp);
+	LOG_USER("%s", cp);
 
 	v = sam3_reg_fieldname(pChip, "NVPTYP", pChip->cfg.CHIPID_CIDR, 28, 3);
-	LOG_USER_N("%s\n", nvptype[ v ]);
+	LOG_USER("%s", nvptype[ v ]);
 
 	v = sam3_reg_fieldname(pChip, "EXTID", pChip->cfg.CHIPID_CIDR, 31, 1);
-	LOG_USER_N("(exists: %s)\n", _yes_or_no(v));
+	LOG_USER("(exists: %s)", _yes_or_no(v));
 }
 
 static void
@@ -1549,14 +1549,14 @@ sam3_explain_ckgr_mcfr(struct sam3_chip *pChip)
 
 
 	v = sam3_reg_fieldname(pChip, "MAINFRDY", pChip->cfg.CKGR_MCFR, 16, 1);
-	LOG_USER_N("(main ready: %s)\n", _yes_or_no(v));
+	LOG_USER("(main ready: %s)", _yes_or_no(v));
 
 	v = sam3_reg_fieldname(pChip, "MAINF", pChip->cfg.CKGR_MCFR, 0, 16);
 
 	v = (v * pChip->cfg.slow_freq) / 16;
 	pChip->cfg.mainosc_freq = v;
 
-	LOG_USER_N("(%3.03f Mhz (%d.%03dkhz slowclk)\n",
+	LOG_USER("(%3.03f Mhz (%d.%03dkhz slowclk)",
 				 _tomhz(v),
 				 pChip->cfg.slow_freq / 1000,
 				 pChip->cfg.slow_freq % 1000);
@@ -1574,12 +1574,12 @@ sam3_explain_ckgr_plla(struct sam3_chip *pChip)
 	LOG_USER_N("\n");
 	pChip->cfg.plla_freq = 0;
 	if (mula == 0) {
-		LOG_USER_N("\tPLLA Freq: (Disabled,mula = 0)\n");
+		LOG_USER("\tPLLA Freq: (Disabled,mula = 0)");
 	} else if (diva == 0) {
-		LOG_USER_N("\tPLLA Freq: (Disabled,diva = 0)\n");
+		LOG_USER("\tPLLA Freq: (Disabled,diva = 0)");
 	} else if (diva == 1) {
 		pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1));
-		LOG_USER_N("\tPLLA Freq: %3.03f MHz\n",
+		LOG_USER("\tPLLA Freq: %3.03f MHz",
 					 _tomhz(pChip->cfg.plla_freq));
 	}
 }
@@ -1620,7 +1620,7 @@ sam3_explain_mckr(struct sam3_chip *pChip)
 		break;
 	}
 
-	LOG_USER_N("%s (%3.03f Mhz)\n",
+	LOG_USER("%s (%3.03f Mhz)",
 				  cp,
 				  _tomhz(fin));
 	pres = sam3_reg_fieldname(pChip, "PRES", pChip->cfg.PMC_MCKR, 4, 3);
@@ -1660,14 +1660,14 @@ sam3_explain_mckr(struct sam3_chip *pChip)
 		assert(0);
 		break;
 	}
-	LOG_USER_N("(%s)\n", cp);
+	LOG_USER("(%s)", cp);
 	fin = fin / pdiv;
 	// sam3 has a *SINGLE* clock -
 	// other at91 series parts have divisors for these.
 	pChip->cfg.cpu_freq = fin;
 	pChip->cfg.mclk_freq = fin;
 	pChip->cfg.fclk_freq = fin;
-	LOG_USER_N("\t\tResult CPU Freq: %3.03f\n",
+	LOG_USER("\t\tResult CPU Freq: %3.03f",
 				  _tomhz(fin));
 }
 
@@ -1829,7 +1829,7 @@ sam3_GetInfo(struct sam3_chip *pChip)
 		// display all regs
 		LOG_DEBUG("Start: %s", pReg->name);
 		regval = *sam3_get_reg_ptr(&(pChip->cfg), pReg);
-		LOG_USER_N("%*s: [0x%08x] -> 0x%08x\n",
+		LOG_USER("%*s: [0x%08x] -> 0x%08x",
 					 REG_NAME_WIDTH,
 					 pReg->name,
 					 pReg->address,
@@ -1840,14 +1840,14 @@ sam3_GetInfo(struct sam3_chip *pChip)
 		LOG_DEBUG("End: %s", pReg->name);
 		pReg++;
 	}
-	LOG_USER_N("   rc-osc: %3.03f MHz\n", _tomhz(pChip->cfg.rc_freq));
-	LOG_USER_N("  mainosc: %3.03f MHz\n", _tomhz(pChip->cfg.mainosc_freq));
-	LOG_USER_N("     plla: %3.03f MHz\n", _tomhz(pChip->cfg.plla_freq));
-	LOG_USER_N(" cpu-freq: %3.03f MHz\n", _tomhz(pChip->cfg.cpu_freq));
-	LOG_USER_N("mclk-freq: %3.03f MHz\n", _tomhz(pChip->cfg.mclk_freq));
+	LOG_USER("   rc-osc: %3.03f MHz", _tomhz(pChip->cfg.rc_freq));
+	LOG_USER("  mainosc: %3.03f MHz", _tomhz(pChip->cfg.mainosc_freq));
+	LOG_USER("     plla: %3.03f MHz", _tomhz(pChip->cfg.plla_freq));
+	LOG_USER(" cpu-freq: %3.03f MHz", _tomhz(pChip->cfg.cpu_freq));
+	LOG_USER("mclk-freq: %3.03f MHz", _tomhz(pChip->cfg.mclk_freq));
 
 
-	LOG_USER_N(" UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+	LOG_USER(" UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x",
 				  pChip->cfg.unique_id[0],
 				  pChip->cfg.unique_id[1],
 				  pChip->cfg.unique_id[2],
@@ -2007,7 +2007,7 @@ sam3_GetDetails(struct sam3_bank_private *pPrivate)
 		LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can this chip?)",
 				  (unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR));
 		// Help the victim, print details about the chip
-		LOG_INFO_N("SAM3 CHIPID_CIDR: 0x%08x decodes as follows\n",
+		LOG_INFO("SAM3 CHIPID_CIDR: 0x%08x decodes as follows",
 						pPrivate->pChip->cfg.CHIPID_CIDR);
 		sam3_explain_chipid_cidr(pPrivate->pChip);
 		return ERROR_FAIL;
@@ -2588,7 +2588,7 @@ COMMAND_HANDLER(sam3_handle_info_command)
 
 	r = sam3_GetInfo(pChip);
 	if (r != ERROR_OK) {
-		LOG_DEBUG("Sam3Info, Failed %d\n",r);
+		LOG_DEBUG("Sam3Info, Failed %d",r);
 		return r;
 	}
 

src/flash/nor/at91sam7.c

@@ -1261,7 +1261,7 @@ COMMAND_HANDLER(at91sam7_handle_gpnvm_command)
 
 	/* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
 	status = at91sam7_get_flash_status(bank->target, 0);
-	LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32 " \n", flashcmd, bit, status);
+	LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32, flashcmd, bit, status);
 
 	/* check protect state */
 	at91sam7_protect_check(bank);

src/helper/command.c

@@ -676,7 +676,7 @@ int command_run_line(struct command_context *context, char *line)
 		{
 			/* We do not print the connection closed error message */
 			Jim_MakeErrorMessage(interp);
-			LOG_USER_N("%s\n", Jim_GetString(Jim_GetResult(interp), NULL));
+			LOG_USER("%s", Jim_GetString(Jim_GetResult(interp), NULL));
 		}
 		if (retval == ERROR_OK)
 		{
@@ -706,7 +706,7 @@ int command_run_line(struct command_context *context, char *line)
 				buff[chunk] = 0;
 				LOG_USER_N("%s", buff);
 			}
-			LOG_USER_N("%s", "\n");
+			LOG_USER_N("\n");
 		}
 		retval = ERROR_OK;
 	}
@@ -860,8 +860,7 @@ static void command_help_show_wrap(const char *str, unsigned n, unsigned n2)
 		if (next - last < HELP_LINE_WIDTH(n))
 			cp = next;
 		command_help_show_indent(n);
-		LOG_USER_N("%.*s", (int)(cp - last), last);
-		LOG_USER_N("\n");
+		LOG_USER("%.*s", (int)(cp - last), last);
 		last = cp + 1;
 		n = n2;
 	}

src/helper/log.h

@@ -113,9 +113,6 @@ extern int debug_level;
 #define LOG_INFO(expr ...) \
 		log_printf_lf (LOG_LVL_INFO, __FILE__, __LINE__, __FUNCTION__, expr)
 
-#define LOG_INFO_N(expr ...) \
-		log_printf (LOG_LVL_INFO, __FILE__, __LINE__, __FUNCTION__, expr)
-
 #define LOG_WARNING(expr ...) \
 		log_printf_lf (LOG_LVL_WARNING, __FILE__, __LINE__, __FUNCTION__, expr)
 

src/jtag/drivers/arm-jtag-ew.c

@@ -440,7 +440,7 @@ static int armjtagew_get_status(void)
 	if (result == 0)
 	{
 		unsigned int u_tg = buf_get_u32(usb_in_buffer, 0, 16);
-		LOG_INFO("U_tg = %d mV, U_aux = %d mV, U_tgpwr = %d mV, I_tgpwr = %d mA, D1 = %d, Target power %s %s\n",
+		LOG_INFO("U_tg = %d mV, U_aux = %d mV, U_tgpwr = %d mV, I_tgpwr = %d mA, D1 = %d, Target power %s %s",
 			 (int)(buf_get_u32(usb_in_buffer + 0, 0, 16)),
 			 (int)(buf_get_u32(usb_in_buffer + 2, 0, 16)),
 			 (int)(buf_get_u32(usb_in_buffer + 4, 0, 16)),

src/jtag/drivers/ep93xx.c

@@ -195,8 +195,8 @@ static int ep93xx_init(void)
 	gpio_data_register = gpio_controller + 0x08;
 	gpio_data_direction_register = gpio_controller + 0x18;
 
-	LOG_INFO("gpio_data_register      = %p\n", gpio_data_register);
-	LOG_INFO("gpio_data_direction_reg = %p\n", gpio_data_direction_register);
+	LOG_INFO("gpio_data_register      = %p", gpio_data_register);
+	LOG_INFO("gpio_data_direction_reg = %p", gpio_data_direction_register);
 	/*
 	 * Configure bit 0 (TDO) as an input, and bits 1-5 (TDI, TCK
 	 * TMS, TRST, SRST) as outputs.  Drive TDI and TCK low, and

src/jtag/drivers/ft2232.c

@@ -2128,7 +2128,7 @@ static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid, int more, int* try_mor
 			} else {
 				/* drat, give the user a meaningfull message.
 				 * telling the use we tried *BOTH* methods. */
-				LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n",
+				LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'",
 							ft2232_device_desc,
 							ft2232_device_desc_A);
 			}

src/jtag/drivers/rlink.c

@@ -504,7 +504,7 @@ dtc_run_download(
 	int	usb_err;
 	int	i;
 
-	LOG_DEBUG(": %d/%d\n", command_buffer_size, reply_buffer_size);
+	LOG_DEBUG(": %d/%d", command_buffer_size, reply_buffer_size);
 
 	usb_err = usb_bulk_write(
 		pHDev_param,
@@ -1592,7 +1592,7 @@ int rlink_init(void)
 		return ERROR_FAIL;
 	}
 
-	LOG_DEBUG("Opened device, pHDev = %p\n", pHDev);
+	LOG_DEBUG("Opened device, pHDev = %p", pHDev);
 
 	/* usb_set_configuration required under win32 */
 	usb_set_configuration(pHDev, dev->config[0].bConfigurationValue);
@@ -1612,7 +1612,7 @@ int rlink_init(void)
 		}
 		else
 		{
-			LOG_DEBUG("interface claimed!\n");
+			LOG_DEBUG("interface claimed!");
 			break;
 		}
 	} while (--retries);
@@ -1658,10 +1658,10 @@ int rlink_init(void)
 		LOG_ERROR("USB read error: %s", usb_strerror());
 		return(ERROR_FAIL);
 	}
-	LOG_DEBUG(INTERFACE_NAME" firmware version: %d.%d.%d\n", reply_buffer[0], reply_buffer[1], reply_buffer[2]);
+	LOG_DEBUG(INTERFACE_NAME" firmware version: %d.%d.%d", reply_buffer[0], reply_buffer[1], reply_buffer[2]);
 
 	if ((reply_buffer[0] != 0) || (reply_buffer[1] != 0) || (reply_buffer[2] != 3)) {
-		LOG_WARNING("The rlink device is not of the version that the developers have played with.  It may or may not work.\n");
+		LOG_WARNING("The rlink device is not of the version that the developers have played with.  It may or may not work.");
 	}
 
 	/* Probe port E for adapter presence */
@@ -1692,7 +1692,7 @@ int rlink_init(void)
 );
 
 	if ((reply_buffer[0] & ST7_PE_ADAPTER_SENSE_IN) != 0) {
-		LOG_WARNING("target detection problem\n");
+		LOG_WARNING("target detection problem");
 	}
 
 	ep1_generic_commandl(
@@ -1718,7 +1718,7 @@ int rlink_init(void)
 
 
 	if ((reply_buffer[0] & ST7_PE_ADAPTER_SENSE_IN) == 0) {
-		LOG_WARNING("target not plugged in\n");
+		LOG_WARNING("target not plugged in");
 	}
 
 	/* float ports A and B */

src/jtag/drivers/usb_blaster.c

@@ -121,7 +121,7 @@ static int usb_blaster_buf_write(
 	DWORD dw_bytes_written;
 
 #ifdef _DEBUG_JTAG_IO_
-	LOG_DEBUG("usb_blaster_buf_write %02X (%d)\n", buf[0], size);
+	LOG_DEBUG("usb_blaster_buf_write %02X (%d)", buf[0], size);
 #endif
 	status = FT_Write(ftdih, buf, size, &dw_bytes_written);
 	if (status != FT_OK)
@@ -135,7 +135,7 @@ static int usb_blaster_buf_write(
 #elif BUILD_USB_BLASTER_LIBFTDI == 1
 	int retval;
 #ifdef _DEBUG_JTAG_IO_
-	LOG_DEBUG("usb_blaster_buf_write %02X (%d)\n", buf[0], size);
+	LOG_DEBUG("usb_blaster_buf_write %02X (%d)", buf[0], size);
 #endif
 	retval = ftdi_write_data(&ftdic, buf, size);
 	if (retval < 0)
@@ -164,7 +164,7 @@ usb_blaster_buf_read(uint8_t *buf, unsigned size, uint32_t *bytes_read)
 		return ERROR_JTAG_DEVICE_ERROR;
 	}
 #ifdef _DEBUG_JTAG_IO_
-	LOG_DEBUG("usb_blaster_buf_read %02X (%lu)\n", buf[0], dw_bytes_read);
+	LOG_DEBUG("usb_blaster_buf_read %02X (%lu)", buf[0], dw_bytes_read);
 #endif
 	*bytes_read = dw_bytes_read;
 	return ERROR_OK;
@@ -188,7 +188,7 @@ usb_blaster_buf_read(uint8_t *buf, unsigned size, uint32_t *bytes_read)
 		*bytes_read += retval;
 	}
 #ifdef _DEBUG_JTAG_IO_
-	LOG_DEBUG("usb_blaster_buf_read %02X (%d)\n", buf[0], *bytes_read);
+	LOG_DEBUG("usb_blaster_buf_read %02X (%d)", buf[0], *bytes_read);
 #endif
 	return ERROR_OK;
 #endif
@@ -267,7 +267,7 @@ static int usb_blaster_read_data(void)
 static void usb_blaster_write(int tck, int tms, int tdi)
 {
 #ifdef _DEBUG_JTAG_IO_
-	LOG_DEBUG("---- usb_blaster_write(%d,%d,%d)\n", tck, tms, tdi);
+	LOG_DEBUG("---- usb_blaster_write(%d,%d,%d)", tck, tms, tdi);
 #endif
 	out_value &= ~(TCK | TMS | TDI);
 	if (tck)

src/jtag/tcl.c

@@ -655,7 +655,7 @@ static void jtag_tap_handle_event(struct jtag_tap *tap, enum jtag_event e)
 		if (Jim_EvalObj(jteap->interp, jteap->body) != JIM_OK)
 		{
 			Jim_MakeErrorMessage(jteap->interp);
-			LOG_USER_N("%s\n", Jim_GetString(Jim_GetResult(jteap->interp), NULL));
+			LOG_USER("%s", Jim_GetString(Jim_GetResult(jteap->interp), NULL));
 			continue;
 		}
 

src/target/arm946e.c

@@ -246,7 +246,7 @@ uint32_t arm946e_invalidate_whole_dcache(struct target *target)
 			retval = arm946e_write_cp15(target, 0x3a, cp15_idx);
 			if (retval != ERROR_OK)
 			{
-				LOG_DEBUG("ERROR writing index\n");
+				LOG_DEBUG("ERROR writing index");
 				return retval;
 			}
 
@@ -261,7 +261,7 @@ uint32_t arm946e_invalidate_whole_dcache(struct target *target)
 			retval = arm946e_write_cp15(target, 0x35, 0x1);
 			if (retval != ERROR_OK)
 			{
-				LOG_DEBUG("ERROR cleaning cache line\n");
+				LOG_DEBUG("ERROR cleaning cache line");
 				return retval;
 			}
 
@@ -269,7 +269,7 @@ uint32_t arm946e_invalidate_whole_dcache(struct target *target)
 			retval = arm946e_write_cp15(target, 0x1a, 0x1);
 			if (retval != ERROR_OK)
 			{
-				LOG_DEBUG("ERROR flushing cache line\n");
+				LOG_DEBUG("ERROR flushing cache line");
 				return retval;
 			}
 		}
@@ -291,7 +291,7 @@ uint32_t arm946e_invalidate_whole_icache(struct target *target)
 	retval = arm946e_write_cp15(target, 0x0f, 0x1);
 	if (retval != ERROR_OK)
 	{
-		LOG_DEBUG("ERROR flushing I$\n");
+		LOG_DEBUG("ERROR flushing I$");
 		return retval;
 	}
 
@@ -371,7 +371,7 @@ void arm946e_pre_restore_context(struct target *target)
 		retval = arm946e_write_cp15(target, 0x02, ctr_reg);
 		if (retval != ERROR_OK)
 		{
-			LOG_DEBUG("ERROR enabling cache\n");
+			LOG_DEBUG("ERROR enabling cache");
 		}
 	} /* if preserve_cache */
 }
@@ -421,7 +421,7 @@ uint32_t arm946e_invalidate_dcache(struct target *target, uint32_t address,
 			retval = arm946e_write_cp15(target, 0x3a, cp15_idx);
 			if (retval != ERROR_OK)
 			{
-				LOG_DEBUG("ERROR writing index\n");
+				LOG_DEBUG("ERROR writing index");
 				return retval;
 			}
 
@@ -439,7 +439,7 @@ uint32_t arm946e_invalidate_dcache(struct target *target, uint32_t address,
 				retval = arm946e_write_cp15(target, 0x35, 0x1);
 				if (retval != ERROR_OK)
 				{
-					LOG_DEBUG("ERROR cleaning cache line\n");
+					LOG_DEBUG("ERROR cleaning cache line");
 					return retval;
 				}
 
@@ -447,7 +447,7 @@ uint32_t arm946e_invalidate_dcache(struct target *target, uint32_t address,
 				retval = arm946e_write_cp15(target, 0x1c, 0x1);
 				if (retval != ERROR_OK)
 				{
-					LOG_DEBUG("ERROR flushing cache line\n");
+					LOG_DEBUG("ERROR flushing cache line");
 					return retval;
 				}
 
@@ -480,7 +480,7 @@ uint32_t arm946e_invalidate_icache(struct target *target, uint32_t address,
 			retval = arm946e_write_cp15(target, 0x3a, cp15_idx);
 			if (retval != ERROR_OK)
 			{
-				LOG_DEBUG("ERROR writing index\n");
+				LOG_DEBUG("ERROR writing index");
 				return retval;
 			}
 
@@ -498,7 +498,7 @@ uint32_t arm946e_invalidate_icache(struct target *target, uint32_t address,
 				retval = arm946e_write_cp15(target, 0x1d, 0x0);
 				if (retval != ERROR_OK)
 				{
-					LOG_DEBUG("ERROR flushing cache line\n");
+					LOG_DEBUG("ERROR flushing cache line");
 					return retval;
 				}
 

src/target/mips32_pracc.c

@@ -119,7 +119,7 @@ static int wait_for_pracc_rw(struct mips_ejtag *ejtag_info, uint32_t *ctrl)
 		mips_ejtag_drscan_32(ejtag_info, &ejtag_ctrl);
 		if (ejtag_ctrl & EJTAG_CTRL_PRACC)
 			break;
-		LOG_DEBUG("DEBUGMODULE: No memory access in progress!\n");
+		LOG_DEBUG("DEBUGMODULE: No memory access in progress!");
 		return ERROR_JTAG_DEVICE_ERROR;
 	}
 

src/target/oocd_trace.c

@@ -46,7 +46,7 @@ static int oocd_trace_read_reg(struct oocd_trace *oocd_trace, int reg, uint32_t
 		bytes_to_read -= bytes_read;
 	}
 
-	LOG_DEBUG("reg #%i: 0x%8.8x\n", reg, *value);
+	LOG_DEBUG("reg #%i: 0x%8.8x", reg, *value);
 
 	return ERROR_OK;
 }
@@ -63,7 +63,7 @@ static int oocd_trace_write_reg(struct oocd_trace *oocd_trace, int reg, uint32_t
 	data[4] = (value & 0xff000000) >> 24;
 
 	bytes_written = write(oocd_trace->tty_fd, data, 5);
-	LOG_DEBUG("reg #%i: 0x%8.8x\n", reg, value);
+	LOG_DEBUG("reg #%i: 0x%8.8x", reg, value);
 
 	return ERROR_OK;
 }
@@ -136,7 +136,7 @@ static int oocd_trace_init(struct etm_context *etm_ctx)
 	 * read up any leftover characters to ensure communication is in sync */
 	while ((bytes_read = read(oocd_trace->tty_fd, trash, sizeof(trash))) > 0)
 	{
-		LOG_DEBUG("%zi bytes read\n", bytes_read);
+		LOG_DEBUG("%zi bytes read", bytes_read);
 	};
 
 	return ERROR_OK;