Skip to content
  • David Brownell's avatar
    finish removing deprecated/obsolete commands · d70d9634
    David Brownell authored
    
    
    It's been about a year since these were deprecated and, in most
    cases, removed.  There's no point in carrying that documentation,
    or backwards compatibility for "jtag_device" and "jtag_speed",
    around forever.  (Or a few remnants of obsolete code...)
    
    Removed a few obsolete uses of "jtag_speed":
    
     - The Calao stuff hasn't worked since July 2008.  (Those Atmel
       targets need to work with a 32KHz core clock after reset until
       board-specific init-reset code sets up the PLL and enables a
       faster JTAg clock.)
     - Parport speed controls don't actually work (tops out at about
       1 MHz on typical HW).
     - In general, speed controls need to live in board.cfg files (or
       sometimes target.cfg files), not interface.cfg ...
    
    Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
    d70d9634