Commit e1c05472 authored by Rahix's avatar Rahix
Browse files

Merge branch 'patch-1' into 'master'

Fix typos

See merge request !7
parents 233b6ec9 20e89b1c
Pipeline #1418 passed with stages
in 56 seconds
......@@ -11,7 +11,7 @@ Our reconstruction of the card10 badge consists of three things:
- The [Harmonic Board](#harmonic-board)
- Hosts the user interface, a few sensors, lots of (RGB) LEDs and the battery
The two boards are connected via a boad to board connector and then screwed together with M2 screws. The wristband is attached to back of the Fundamental Board with two clamps.
The two boards are connected via a board to board connector and then screwed together with M2 screws. The wristband is attached to back of the Fundamental Board with two clamps.
![Harmonic Board prototype top side](/media/hardware/low_res_jpg/card10_harmonic_board_prototype_1.jpg)
......@@ -21,7 +21,7 @@ The two boards are connected via a boad to board connector and then screwed toge
| | |
| -------------------- |-------------|
| Weight | ~ 19 g |
| Size | Height (without wirstband): ~8-9 mm. Width: 38 mm. Length: 45 mm |
| Size | Height (without wristband): ~8-9 mm. Width: 38 mm. Length: 45 mm |
| RGB LEDs | 11 RGB LEDs facing up, 4 RGB LEDs facing down (SK9822-2020)|
| Wirstband GPIOs | 2 GPIOs + GND + Power per side |
| Battery capacity | 200 mAh (prototypes: 100-150 mAh) |
......@@ -31,7 +31,7 @@ The two boards are connected via a boad to board connector and then screwed toge
| Accelerometer | BMA400 |
| Sensor fusion | BHI160 (accelerometer + gyroscope + sensor fusion) |
| Magnetometer | BMM150 |
| Environmental sensor | BME680 (temeperature, rel. humidity, air pressure, air quality) |
| Environmental sensor | BME680 (temperature, rel. humidity, air pressure, air quality) |
| ECG | MAX30001 |
| Pulse sensor | MAX86150 (with second ECG channel) |
| Ambient light sensor | 940 nm IR LED attached to ADC |
......@@ -44,7 +44,7 @@ More information to come.
## Fundamental Board
The Fundamental Board is located just above the wristband; above it come the battery, the Harmonic Board, and the display. The Harmonic Board is connected to the Fundamental Board via a board to board connector.
The Fundamental Board is located just above the wristband; above it comes the battery, the Harmonic Board, and the display. The Harmonic Board is connected to the Fundamental Board via a board to board connector.
Several interfaces for [interhacktions](/en/interhacktions) are included on the Fundamental Board. The travelers can be alerted to an event using the vibration motor. Screws through the ECG contacts are used both for attaching the wristband and for making contact with your skin for ECG measurements. Besides its use for interhacktions, the [USB-C](/en/usbc) connector is also used for charging the battery and for updating the firmware.
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment