Commit 994a1ea9 authored by schneider's avatar schneider
Browse files

move assembly to user guide

parent e7c59b80
Pipeline #4900 passed with stage
in 10 seconds
......@@ -2,42 +2,4 @@
title: Assemble your card10
---
Your card10 comes in a bag with all its components and a [flyer/booklet/manual](/media/assembly_flyer.pdf). You can also checkout our assembly [video-tutorial](/vid/).
The main components of your card10 are two electronic boards, the _fundamental_ board and the _harmonic_ board.
The _fundamental_ board sits directly on the wrist band, the _harmonic_ board with the display sits on top of it.
If you are curious to learn more about the two boards, you can find a more detailed description on the [hardware overview](/en/hardware-overview/) page.
When unpacking and assembling, make sure to keep your protective foil on the display at first, until you had a look at the
[polarizing display](/en/faq/#why-should-i-consider-keeping-the-protective-foil-on-the-display) faq section.
[![Harmonic board with glue dot](/media/assemble/IMG_20190819_143216.jpg)](/media/assemble/IMG_20190819_143216.jpg)
- use the glue dot to attach the battery to the harmonic board
[![Battery attached to harmonic board](/media/assemble/IMG_20190819_143128.jpg)](/media/assemble/IMG_20190819_143128.jpg)
- plug in the battery
[![Attaching the spacers](/media/assemble/IMG_20190819_142944.jpg)](/media/assemble/IMG_20190819_142944.jpg)
- attach the spacers with four of the screws
- put the nylon spacer next to LED3. The nylon spacer is not symmetrical, the flat side should face the fundamental board screw. Be careful not to fasten the screw too firmly to the nylon spacer, otherwise you risk damaging the thread in the spacer and the screw will become loose.
[![Both boards placed on top of each other](/media/assemble/IMG_20190819_143114.jpg)](/media/assemble/IMG_20190819_143114.jpg)
- carefully connect the two boards with the connector
[![Wristband with card10](/media/assemble/IMG_20190819_142436.jpg)](/media/assemble/IMG_20190819_142436.jpg)
- place the wristband with its fluffy side up, put the metal bars on top of the badge and add the remaining screws
[![Wristband with card10](/media/assemble/IMG_20190819_142653.jpg)](/media/assemble/IMG_20190819_142653.jpg)
## Have fun with your card10!
Now it's time to [switch on](/en/gettingstarted/#card10-navigation)
your card10.
[![Happy Hacking!](/media/assemble/IMG_m6w9xw.jpg)](/media/assemble/IMG_m6w9xw.jpg)
......@@ -3,8 +3,7 @@ title: tl;dr
---
## tl;dr
- [assembly video](/vid)
- [Assembly guide](/en/assembleyourcard10) - Assemble your card10
- [Assembly video and instructions](../userguide/assembly) - Assemble your card10
- [app](/app) - Companion app for Android and iOS
- [personal state](/ps)
- [Interhacktions](/en/interhacktions) - a guide to making apps
......
......@@ -7,8 +7,8 @@ title: User Guide
The user guide of the card10 is divided into a few sections. Here is an overview of the different sections and what they cover:
### [Assembly](assembly)
- Assembly video
- Instructions how to assemble the card10
- [Assembly video](assembly#assembly-video)
- [Assembly instructions](assembly#assembly-instructions)
### [General usage](general-usage)
- [Buttons](general-usage#buttons)
......
......@@ -2,4 +2,53 @@
title: "0: Assembly"
---
Your card10 comes in a bag with all its components and a [flyer/booklet/manual](/media/assembly_flyer.pdf).
## Assembly video
This short [video](https://media.ccc.de/v/camp2019-2323-card10) shows how to assemble your card10.
All that you'll need is a Torx T6 screwdriver.
{{< rawhtml >}}
<iframe width="1024" height="400" src="https://media.ccc.de/v/camp2019-2323-card10/oembed" frameborder="0" allowfullscreen></iframe>
{{< /rawhtml >}}
## Assembly instructions
The main components of your card10 are two electronic boards, the _fundamental_ board and the _harmonic_ board.
The _fundamental_ board sits directly on the wrist band, the _harmonic_ board with the display sits on top of it.
If you are curious to learn more about the two boards, you can find a more detailed description on the [hardware overview](../..//hardware-overview/) page.
When unpacking and assembling, make sure to keep your protective foil on the display at first, until you had a look at the
[polarizing display](../../faq/#why-should-i-consider-keeping-the-protective-foil-on-the-display) faq section.
[![Harmonic board with glue dot](/media/assemble/IMG_20190819_143216.jpg)](/media/assemble/IMG_20190819_143216.jpg)
- use the glue dot to attach the battery to the harmonic board
[![Battery attached to harmonic board](/media/assemble/IMG_20190819_143128.jpg)](/media/assemble/IMG_20190819_143128.jpg)
- plug in the battery
[![Attaching the spacers](/media/assemble/IMG_20190819_142944.jpg)](/media/assemble/IMG_20190819_142944.jpg)
- attach the spacers with four of the screws
- put the nylon spacer next to LED3. The nylon spacer is not symmetrical, the flat side should face the fundamental board screw. Be careful not to fasten the screw too firmly to the nylon spacer, otherwise you risk damaging the thread in the spacer and the screw will become loose.
[![Both boards placed on top of each other](/media/assemble/IMG_20190819_143114.jpg)](/media/assemble/IMG_20190819_143114.jpg)
- carefully connect the two boards with the connector
[![Wristband with card10](/media/assemble/IMG_20190819_142436.jpg)](/media/assemble/IMG_20190819_142436.jpg)
- place the wristband with its fluffy side up, put the metal bars on top of the badge and add the remaining screws
[![Wristband with card10](/media/assemble/IMG_20190819_142653.jpg)](/media/assemble/IMG_20190819_142653.jpg)
### Have fun with your card10!
Now it's time to [switch on](../..//gettingstarted/#card10-navigation)
your card10.
[![Happy Hacking!](/media/assemble/IMG_m6w9xw.jpg)](/media/assemble/IMG_m6w9xw.jpg)
......@@ -2,12 +2,4 @@
title: Assembly Video
---
Welcome to your card10, with this short video you'll learn how to assembly your own camp badge.
All that you'll need is a Torx T6 screwdriver.
- [Video Link](https://media.ccc.de/v/camp2019-2323-card10)
- [Download Flyer](/media/assembly_flyer.pdf)
- [Text Tutorial](/en/assembleyourcard10)
<iframe width="1024" height="576" src="https://media.ccc.de/v/camp2019-2323-card10/oembed" frameborder="0" allowfullscreen></iframe>
This page has moved to the [User Guide](/en/userguide/assembly)
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment