Commit 5a15f8a1 authored by schneider's avatar schneider
Browse files

Update gettingstarted.md

parent b333dc62
Pipeline #4810 passed with stage
in 8 seconds
......@@ -35,18 +35,13 @@ state LED will remain blinking and glowing as you set it in the app.
### USB storage
Your card10 can function similar to a USB stick, if you start it in _USB storage mode_. You can use this mode to upload _configuration files_ and _micropython scripts_. To enter _USB storage mode_, first switch off your card10 with a long press of the POWER button. Next, hold down the RIGHT button and the POWER button, until your display shows the text "USB activated. Ready.".
Your card10 can function similar to a USB stick in its _USB storage mode_. You can use this mode to upload _configuration files_ , firmware updates and _MicropPython scripts_.
Now when you connect the card10 to your laptop via USB, it will show up as a storage device.
To enter _USB storage mode_, use POWER button to enter the menu. Now use the RIGHT button to select _USB Storage_ and press SELECT. If your card10 is connected to another computer via USB, it will show up as a storage device. Press any button to exit _USB storage mode_ again.
<div class="p-notification--caution">
<p class="p-notification__response">
<span class="p-notification__status">Important:</span>Don't forget to eject/unmount the card10 before unplugging it or pressing any buttons on the card10
</p>
</div>
**Important:** Don't forget to eject/unmount the card10 before unplugging it or pressing any
The USB storage mode is exited by briefly pressing the POWER button.
If you don't have the _USB Storage_ meny entry or your card10 reboots while using it, you can also use the bootloader to access your card10: First switch off your card10 with a long press of the POWER button. Next, hold down the RIGHT button and the POWER button, until your display shows the text "USB activated. Ready.". Use your operating systems "Eject Safely" functiion or press the POWER button again to exit the bootloader after you are done.
### Setting your nickname
To set your nickname, create a file called `nickname.txt` on your laptop.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment