Commit 3a6942b9 authored by schneider's avatar schneider
Browse files

Update gettingstarted.md

parent 963e6fde
Pipeline #4610 passed with stage
in 29 seconds
......@@ -11,7 +11,7 @@ You just received your card10 - what now?
## card10 navigation
There are four buttons on the card10 _harmonic_ board: On the top left, just above the USB-C connector is the POWER button. Below is the LEFT button. The buttons on the right side are closer together. On this side, the top button is the SELECT button, the one below it is the RIGHT button.
<img class="center" alt="Drawing of card10 with button names" src="/media/card10buttons.svg" width="220" height="auto" align="center">
[![Drawing of card10 with button names](/media/card10buttons.svg)](/media/card10buttons.svg)
### switching your card10 on and off
......@@ -35,7 +35,7 @@ state LED will remain blinking and glowing as you set it in the app.
### USB storage
Your card10 can function similar to a USB stick, if you start it in _USB storage mode_. You can use this mode to upload _configuration files_ and _micropython scripts_. To enter _USB storage mode_, first switch off your card10 with a long press of the POWER button. Next, hold down the LOWER RIGHT button and the POWER button, until your display shows the text "USB activated. Ready.".
Your card10 can function similar to a USB stick, if you start it in _USB storage mode_. You can use this mode to upload _configuration files_ and _micropython scripts_. To enter _USB storage mode_, first switch off your card10 with a long press of the POWER button. Next, hold down the RIGHT button and the POWER button, until your display shows the text "USB activated. Ready.".
Now when you connect the card10 to your laptop via USB, it will show up as a storage device.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment